PERL(1) PERL(1) NAME perl - Practical Extraction and Report Language SYNOPSIS perl4 [options] filename args DESCRIPTION Perl is an interpreted language optimized for scanning arbitrary text files, extracting information from those text files, and printing reports based on that informa- tion. It's also a good language for many system manage- ment tasks. The language is intended to be practical (easy to use, efficient, complete) rather than beautiful (tiny, elegant, minimal). It combines (in the author's opinion, anyway) some of the best features of C, sed, awk, and sh, so people familiar with those languages should have little difficulty with it. (Language historians will also note some vestiges of csh, Pascal, and even BASIC- PLUS.) Expression syntax corresponds quite closely to C expression syntax. Unlike most Unix utilities, perl does not arbitrarily limit the size of your data--if you've got the memory, perl can slurp in your whole file as a single string. Recursion is of unlimited depth. And the hash tables used by associative arrays grow as necessary to prevent degraded performance. Perl uses sophisticated pattern matching techniques to scan large amounts of data very quickly. Although optimized for scanning text, perl can also deal with binary data, and can make dbm files look like associative arrays (where dbm is available). Setuid perl scripts are safer than C programs through a dataflow tracing mechanism which prevents many stupid security holes. If you have a problem that would ordinar- ily use sed or awk or sh, but it exceeds their capabili- ties or must run a little faster, and you don't want to write the silly thing in C, then perl may be for you. There are also translators to turn your sed and awk scripts into perl scripts. OK, enough hype. Upon startup, perl looks for your script in one of the following places: 1. Specified line by line via -e switches on the command line. 2. Contained in the file specified by the first filename on the command line. (Note that systems supporting the #! notation invoke interpreters this way.) 3. Passed in implicitly via standard input. This only works if there are no filename arguments--to pass arguments to a stdin script you must explicitly spec- ify a - for the script name. After locating your script, perl compiles it to an Release 4.0 Patchlevel 19 1 PERL(1) PERL(1) internal form. If the script is syntactically correct, it is executed. Options Note: on first reading this section may not make much sense to you. It's here at the front for easy reference. A single-character option may be combined with the follow- ing option, if any. This is particularly useful when invoking a script using the #! construct which only allows one argument. Example: #!/usr/bin/perl -spi.bak # same as -s -p -i.bak ... Options include: -0digits specifies the record separator ($/) as an octal num- ber. If there are no digits, the null character is the separator. Other switches may precede or follow the digits. For example, if you have a version of find which can print filenames terminated by the null character, you can say this: find . -name '*.bak' -print0 | perl -n0e unlink The special value 00 will cause Perl to slurp files in paragraph mode. The value 0777 will cause Perl to slurp files whole since there is no legal character with that value. -a turns on autosplit mode when used with a -n or -p. An implicit split command to the @F array is done as the first thing inside the implicit while loop pro- duced by the -n or -p. perl -ane 'print pop(@F), "\n";' is equivalent to while (<>) { @F = split(' '); print pop(@F), "\n"; } -c causes perl to check the syntax of the script and then exit without executing it. -d runs the script under the perl debugger. See the section on Debugging. Release 4.0 Patchlevel 19 2 PERL(1) PERL(1) -Dnumber sets debugging flags. To watch how it executes your script, use -D14. (This only works if debugging is compiled into your perl.) Another nice value is -D1024, which lists your compiled syntax tree. And -D512 displays compiled regular expressions. -e commandline may be used to enter one line of script. Multiple -e commands may be given to build up a multi-line script. If -e is given, perl will not look for a script filename in the argument list. -iextension specifies that files processed by the <> construct are to be edited in-place. It does this by renaming the input file, opening the output file by the same name, and selecting that output file as the default for print statements. The extension, if supplied, is added to the name of the old file to make a backup copy. If no extension is supplied, no backup is made. Saying "perl -p -i.bak -e "s/foo/bar/;" ... " is the same as using the script: #!/usr/bin/perl -pi.bak s/foo/bar/; which is equivalent to #!/usr/bin/perl while (<>) { if ($ARGV ne $oldargv) { rename($ARGV, $ARGV . '.bak'); open(ARGVOUT, ">$ARGV"); select(ARGVOUT); $oldargv = $ARGV; } s/foo/bar/; } continue { print; # this prints to original filename } select(STDOUT); except that the -i form doesn't need to compare $ARGV to $oldargv to know when the filename has changed. It does, however, use ARGVOUT for the selected file- handle. Note that STDOUT is restored as the default output filehandle after the loop. You can use eof to locate the end of each input file, in case you want to append to each file, or reset line numbering (see example under eof). Release 4.0 Patchlevel 19 3 PERL(1) PERL(1) -Idirectory may be used in conjunction with -P to tell the C pre- processor where to look for include files. By default /usr/include and /usr/lib/perl are searched. -loctnum enables automatic line-ending processing. It has two effects: first, it automatically chops the line ter- minator when used with -n or -p , and second, it assigns $\ to have the value of octnum so that any print statements will have that line terminator added back on. If octnum is omitted, sets $\ to the cur- rent value of $/. For instance, to trim lines to 80 columns: perl -lpe 'substr($_, 80) = ""' Note that the assignment $\ = $/ is done when the switch is processed, so the input record separator can be different than the output record separator if the -l switch is followed by a -0 switch: gnufind / -print0 | perl -ln0e 'print "found $_" if -p' This sets $\ to newline and then sets $/ to the null character. -n causes perl to assume the following loop around your script, which makes it iterate over filename argu- ments somewhat like "sed -n" or awk: while (<>) { ... # your script goes here } Note that the lines are not printed by default. See -p to have lines printed. Here is an efficient way to delete all files older than a week: find . -mtime +7 -print | perl -nle 'unlink;' This is faster than using the -exec switch of find because you don't have to start a process on every filename found. -p causes perl to assume the following loop around your script, which makes it iterate over filename argu- ments somewhat like sed: while (<>) { ... # your script goes here } continue { print; } Release 4.0 Patchlevel 19 4 PERL(1) PERL(1) Note that the lines are printed automatically. To suppress printing use the -n switch. A -p overrides a -n switch. -P causes your script to be run through the C preproces- sor before compilation by perl. (Since both comments and cpp directives begin with the # character, you should avoid starting comments with any words recog- nized by the C preprocessor such as "if", "else" or "define".) -s enables some rudimentary switch parsing for switches on the command line after the script name but before any filename arguments (or before a --). Any switch found there is removed from @ARGV and sets the corre- sponding variable in the perl script. The following script prints "true" if and only if the script is invoked with a -xyz switch. #!/usr/bin/perl -s if ($xyz) { print "true\n"; } -S makes perl use the PATH environment variable to search for the script (unless the name of the script starts with a slash). Typically this is used to emu- late #! startup on machines that don't support #!, in the following manner: #!/usr/bin/perl eval "exec /usr/bin/perl -S $0 $*" if $running_under_some_shell; The system ignores the first line and feeds the script to /bin/sh, which proceeds to try to execute the perl script as a shell script. The shell exe- cutes the second line as a normal shell command, and thus starts up the perl interpreter. On some systems $0 doesn't always contain the full pathname, so the -S tells perl to search for the script if necessary. After perl locates the script, it parses the lines and ignores them because the variable $run- ning_under_some_shell is never true. A better con- struct than $* would be ${1+"$@"}, which handles embedded spaces and such in the filenames, but doesn't work if the script is being interpreted by csh. In order to start up sh rather than csh, some systems may have to replace the #! line with a line containing just a colon, which will be politely ignored by perl. Other systems can't control that, and need a totally devious construct that will work under any of csh, sh or perl, such as the following: Release 4.0 Patchlevel 19 5 PERL(1) PERL(1) eval '(exit $?0)' && eval 'exec /usr/bin/perl -S $0 ${1+"$@"}' & eval 'exec /usr/bin/perl -S $0 $argv:q' if 0; -u causes perl to dump core after compiling your script. You can then take this core dump and turn it into an executable file by using the undump program (not sup- plied). This speeds startup at the expense of some disk space (which you can minimize by stripping the executable). (Still, a "hello world" executable comes out to about 200K on my machine.) If you are going to run your executable as a set-id program then you should probably compile it using taintperl rather than normal perl. If you want to execute a portion of your script before dumping, use the dump operator instead. Note: availability of undump is platform specific and may not be available for a specific port of perl. -U allows perl to do unsafe operations. Currently the only "unsafe" operations are the unlinking of direc- tories while running as superuser, and running setuid programs with fatal taint checks turned into warn- ings. -v prints the version and patchlevel of your perl exe- cutable. -w prints warnings about identifiers that are mentioned only once, and scalar variables that are used before being set. Also warns about redefined subroutines, and references to undefined filehandles or filehan- dles opened readonly that you are attempting to write on. Also warns you if you use == on values that don't look like numbers, and if your subroutines recurse more than 100 deep. -xdirectory tells perl that the script is embedded in a message. Leading garbage will be discarded until the first line that starts with #! and contains the string "perl". Any meaningful switches on that line will be applied (but only one group of switches, as with nor- mal #! processing). If a directory name is speci- fied, Perl will switch to that directory before run- ning the script. The -x switch only controls the the disposal of leading garbage. The script must be ter- minated with __END__ if there is trailing garbage to be ignored (the script can process any or all of the trailing garbage via the DATA filehandle if desired). Release 4.0 Patchlevel 19 6 PERL(1) PERL(1) Data Types and Objects Perl has three data types: scalars, arrays of scalars, and associative arrays of scalars. Normal arrays are indexed by number, and associative arrays by string. The interpretation of operations and values in perl some- times depends on the requirements of the context around the operation or value. There are three major contexts: string, numeric and array. Certain operations return array values in contexts wanting an array, and scalar val- ues otherwise. (If this is true of an operation it will be mentioned in the documentation for that operation.) Operations which return scalars don't care whether the context is looking for a string or a number, but scalar variables and values are interpreted as strings or numbers as appropriate to the context. A scalar is interpreted as TRUE in the boolean sense if it is not the null string or 0. Booleans returned by operators are 1 for true and 0 or '' (the null string) for false. There are actually two varieties of null string: defined and undefined. Undefined null strings are returned when there is no real value for something, such as when there was an error, or at end of file, or when you refer to an uninitialized variable or element of an array. An unde- fined null string may become defined the first time you access it, but prior to that you can use the defined() operator to determine whether the value is defined or not. References to scalar variables always begin with '$', even when referring to a scalar that is part of an array. Thus: $days # a simple scalar variable $days[28] # 29th element of array @days $days{'Feb'} # one value from an associative array $#days # last index of array @days but entire arrays or array slices are denoted by '@': @days # ($days[0], $days[1],... $days[n]) @days[3,4,5] # same as @days[3..5] @days{'a','c'} # same as ($days{'a'},$days{'c'}) and entire associative arrays are denoted by '%': %days # (key1, val1, key2, val2 ...) Any of these eight constructs may serve as an lvalue, that is, may be assigned to. (It also turns out that an assignment is itself an lvalue in certain contexts--see examples under s, tr and chop.) Assignment to a scalar Release 4.0 Patchlevel 19 7 PERL(1) PERL(1) evaluates the righthand side in a scalar context, while assignment to an array or array slice evaluates the right- hand side in an array context. You may find the length of array @days by evaluating "$#days", as in csh. (Actually, it's not the length of the array, it's the subscript of the last element, since there is (ordinarily) a 0th element.) Assigning to $#days changes the length of the array. Shortening an array by this method does not actually destroy any values. Length- ening an array that was previously shortened recovers the values that were in those elements. You can also gain some measure of efficiency by preextending an array that is going to get big. (You can also extend an array by assigning to an element that is off the end of the array. This differs from assigning to $#whatever in that inter- vening values are set to null rather than recovered.) You can truncate an array down to nothing by assigning the null list () to it. The following are exactly equivalent @whatever = (); $#whatever = $[ - 1; If you evaluate an array in a scalar context, it returns the length of the array. The following is always true: scalar(@whatever) == $#whatever - $[ + 1; If you evaluate an associative array in a scalar context, it returns a value which is true if and only if the array contains any elements. (If there are any elements, the value returned is a string consisting of the number of used buckets and the number of allocated buckets, sepa- rated by a slash.) Multi-dimensional arrays are not directly supported, but see the discussion of the $; variable later for a means of emulating multiple subscripts with an associative array. You could also write a subroutine to turn multiple sub- scripts into a single subscript. Every data type has its own namespace. You can, without fear of conflict, use the same name for a scalar variable, an array, an associative array, a filehandle, a subroutine name, and/or a label. Since variable and array references always start with '$', '@', or '%', the "reserved" words aren't in fact reserved with respect to variable names. (They ARE reserved with respect to labels and filehandles, however, which don't have an initial special character. Hint: you could say open(LOG,'logfile') rather than open(log,'logfile'). Using uppercase filehandles also improves readability and protects you from conflict with future reserved words.) Case IS significant--"FOO", "Foo" Release 4.0 Patchlevel 19 8 PERL(1) PERL(1) and "foo" are all different names. Names which start with a letter may also contain digits and underscores. Names which do not start with a letter are limited to one char- acter, e.g. "$%" or "$$". (Most of the one character names have a predefined significance to perl. More later.) Numeric literals are specified in any of the usual float- ing point or integer formats: 12345 12345.67 .23E-10 0xffff # hex 0377 # octal String literals are delimited by either single or double quotes. They work much like shell quotes: double-quoted string literals are subject to backslash and variable sub- stitution; single-quoted strings are not (except for \' and \\). The usual backslash rules apply for making char- acters such as newline, tab, etc., as well as some more exotic forms: \t tab \n newline \r return \f form feed \b backspace \a alarm (bell) \e escape \033 octal char \x1b hex char \c[ control char \l lowercase next char \u uppercase next char \L lowercase till \E \U uppercase till \E \E end case modification You can also embed newlines directly in your strings, i.e. they can end on a different line than they begin. This is nice, but if you forget your trailing quote, the error will not be reported until perl finds another line con- taining the quote character, which may be much further on in the script. Variable substitution inside strings is limited to scalar variables, normal array values, and array slices. (In other words, identifiers beginning with $ or @, followed by an optional bracketed expression as a subscript.) The following code segment prints out "The price is $100." $Price = '$100'; # not interpreted print "The price is $Price.\n";# interpreted Release 4.0 Patchlevel 19 9 PERL(1) PERL(1) Note that you can put curly brackets around the identifier to delimit it from following alphanumerics. Also note that a single quoted string must be separated from a pre- ceding word by a space, since single quote is a valid character in an identifier (see Packages). Two special literals are __LINE__ and __FILE__, which rep- resent the current line number and filename at that point in your program. They may only be used as separate tokens; they will not be interpolated into strings. In addition, the token __END__ may be used to indicate the logical end of the script before the actual end of file. Any following text is ignored (but may be read via the DATA filehandle). The two control characters ^D and ^Z are synonyms for __END__. A word that doesn't have any other interpretation in the grammar will be treated as if it had single quotes around it. For this purpose, a word consists only of alphanu- meric characters and underline, and must start with an alphabetic character. As with filehandles and labels, a bare word that consists entirely of lowercase letters risks conflict with future reserved words, and if you use the -w switch, Perl will warn you about any such words. Array values are interpolated into double-quoted strings by joining all the elements of the array with the delim- iter specified in the $" variable, space by default. (Since in versions of perl prior to 3.0 the @ character was not a metacharacter in double-quoted strings, the interpolation of @array, $array[EXPR], @array[LIST], $array{EXPR}, or @array{LIST} only happens if array is referenced elsewhere in the program or is predefined.) The following are equivalent: $temp = join($",@ARGV); system "echo $temp"; system "echo @ARGV"; Within search patterns (which also undergo double-quotish substitution) there is a bad ambiguity: Is /$foo[bar]/ to be interpreted as /${foo}[bar]/ (where [bar] is a charac- ter class for the regular expression) or as /${foo[bar]}/ (where [bar] is the subscript to array @foo)? If @foo doesn't otherwise exist, then it's obviously a character class. If @foo exists, perl takes a good guess about [bar], and is almost always right. If it does guess wrong, or if you're just plain paranoid, you can force the correct interpretation with curly brackets as above. A line-oriented form of quoting is based on the shell here-is syntax. Following a << you specify a string to terminate the quoted material, and all lines following the Release 4.0 Patchlevel 19 10 PERL(1) PERL(1) current line down to the terminating string are the value of the item. The terminating string may be either an identifier (a word), or some quoted text. If quoted, the type of quotes you use determines the treatment of the text, just as in regular quoting. An unquoted identifier works like double quotes. There must be no space between the << and the identifier. (If you put a space it will be treated as a null identifier, which is valid, and matches the first blank line--see Merry Christmas example below.) The terminating string must appear by itself (unquoted and with no surrounding whitespace) on the terminating line. print <) { print; } while () { print; } for (;;) { print; } print while $_ = ; print while ; The filehandles STDIN, STDOUT and STDERR are predefined. (The filehandles stdin, stdout and stderr will also work except in packages, where they would be interpreted as local identifiers rather than global.) Additional file- handles may be created with the open function. If a is used in a context that is looking for an array, an array consisting of all the input lines is returned, one line per array element. It's easy to make a LARGE data space this way, so use with care. Release 4.0 Patchlevel 19 13 PERL(1) PERL(1) The null filehandle <> is special and can be used to emu- late the behavior of sed and awk. Input from <> comes either from standard input, or from each file listed on the command line. Here's how it works: the first time <> is evaluated, the ARGV array is checked, and if it is null, $ARGV[0] is set to '-', which when opened gives you standard input. The ARGV array is then processed as a list of filenames. The loop while (<>) { ... # code for each line } is equivalent to unshift(@ARGV, '-') if $#ARGV < $[; while ($ARGV = shift) { open(ARGV, $ARGV); while () { ... # code for each line } } except that it isn't as cumbersome to say. It really does shift array ARGV and put the current filename into vari- able ARGV. It also uses filehandle ARGV internally. You can modify @ARGV before the first <> as long as you leave the first filename at the beginning of the array. Line numbers ($.) continue as if the input was one big happy file. (But see example under eof for how to reset line numbers on each file.) If you want to set @ARGV to your own list of files, go right ahead. If you want to pass switches into your script, you can put a loop on the front like this: while ($_ = $ARGV[0], /^-/) { shift; last if /^--$/; /^-D(.*)/ && ($debug = $1); /^-v/ && $verbose++; ... # other switches } while (<>) { ... # code for each line } The <> symbol will return FALSE only once. If you call it again after this it will assume you are processing another @ARGV list, and if you haven't set @ARGV, will input from STDIN. If the string inside the angle brackets is a reference to a scalar variable (e.g. <$foo>), then that variable Release 4.0 Patchlevel 19 14 PERL(1) PERL(1) contains the name of the filehandle to input from. If the string inside angle brackets is not a filehandle, it is interpreted as a filename pattern to be globbed, and either an array of filenames or the next filename in the list is returned, depending on context. One level of $ interpretation is done first, but you can't say <$foo> because that's an indirect filehandle as explained in the previous paragraph. You could insert curly brackets to force interpretation as a filename glob: <${foo}>. Exam- ple: while (<*.c>) { chmod 0644, $_; } is equivalent to open(foo, "echo *.c | tr -s ' \t\r\f' '\\012\\012\\012\\012'|"); while () { chop; chmod 0644, $_; } In fact, it's currently implemented that way. (Which means it will not work on filenames with spaces in them unless you have /bin/csh on your machine.) Of course, the shortest way to do the above is: chmod 0644, <*.c>; Syntax A perl script consists of a sequence of declarations and commands. The only things that need to be declared in perl are report formats and subroutines. See the sections below for more information on those declarations. All uninitialized user-created objects are assumed to start with a null or 0 value until they are defined by some explicit operation such as assignment. The sequence of commands is executed just once, unlike in sed and awk scripts, where the sequence of commands is executed for each input line. While this means that you must explic- itly loop over the lines of your input file (or files), it also means you have much more control over which files and which lines you look at. (Actually, I'm lying--it is pos- sible to do an implicit loop with either the -n or -p switch.) A declaration can be put anywhere a command can, but has no effect on the execution of the primary sequence of com- mands--declarations all take effect at compile time. Release 4.0 Patchlevel 19 15 PERL(1) PERL(1) Typically all the declarations are put at the beginning or the end of the script. Perl is, for the most part, a free-form language. (The only exception to this is format declarations, for fairly obvious reasons.) Comments are indicated by the # charac- ter, and extend to the end of the line. If you attempt to use /* */ C comments, it will be interpreted either as division or pattern matching, depending on the context. So don't do that. Compound statements In perl, a sequence of commands may be treated as one com- mand by enclosing it in curly brackets. We will call this a BLOCK. The following compound commands may be used to control flow: if (EXPR) BLOCK if (EXPR) BLOCK else BLOCK if (EXPR) BLOCK elsif (EXPR) BLOCK ... else BLOCK LABEL while (EXPR) BLOCK LABEL while (EXPR) BLOCK continue BLOCK LABEL for (EXPR; EXPR; EXPR) BLOCK LABEL foreach VAR (ARRAY) BLOCK LABEL BLOCK continue BLOCK Note that, unlike C and Pascal, these are defined in terms of BLOCKs, not statements. This means that the curly brackets are required--no dangling statements allowed. If you want to write conditionals without curly brackets there are several other ways to do it. The following all do the same thing: if (!open(foo)) { die "Can't open $foo: $!"; } die "Can't open $foo: $!" unless open(foo); open(foo) || die "Can't open $foo: $!"; # foo or bust! open(foo) ? 'hi mom' : die "Can't open $foo: $!"; # a bit exotic, that last one The if statement is straightforward. Since BLOCKs are always bounded by curly brackets, there is never any ambi- guity about which if an else goes with. If you use unless in place of if, the sense of the test is reversed. The while statement executes the block as long as the expression is true (does not evaluate to the null string or 0). The LABEL is optional, and if present, consists of an identifier followed by a colon. The LABEL identifies the loop for the loop control statements next, last, and redo (see below). If there is a continue BLOCK, it is Release 4.0 Patchlevel 19 16 PERL(1) PERL(1) always executed just before the conditional is about to be evaluated again, similarly to the third part of a for loop in C. Thus it can be used to increment a loop variable, even when the loop has been continued via the next state- ment (similar to the C "continue" statement). If the word while is replaced by the word until, the sense of the test is reversed, but the conditional is still tested before the first iteration. In either the if or the while statement, you may replace "(EXPR)" with a BLOCK, and the conditional is true if the value of the last command in that block is true. The for loop works exactly like the corresponding while loop: for ($i = 1; $i < 10; $i++) { ... } is the same as $i = 1; while ($i < 10) { ... } continue { $i++; } The foreach loop iterates over a normal array value and sets the variable VAR to be each element of the array in turn. The variable is implicitly local to the loop, and regains its former value upon exiting the loop. The "foreach" keyword is actually identical to the "for" key- word, so you can use "foreach" for readability or "for" for brevity. If VAR is omitted, $_ is set to each value. If ARRAY is an actual array (as opposed to an expression returning an array value), you can modify each element of the array by modifying VAR inside the loop. Examples: for (@ary) { s/foo/bar/; } foreach $elem (@elements) { $elem *= 2; } for ((10,9,8,7,6,5,4,3,2,1,'BOOM')) { print $_, "\n"; sleep(1); } for (1..15) { print "Merry Christmas\n"; } Release 4.0 Patchlevel 19 17 PERL(1) PERL(1) foreach $item (split(/:[\\\n:]*/, $ENV{'TERMCAP'})) { print "Item: $item\n"; } The BLOCK by itself (labeled or not) is equivalent to a loop that executes once. Thus you can use any of the loop control statements in it to leave or restart the block. The continue block is optional. This construct is partic- ularly nice for doing case structures. foo: { if (/^abc/) { $abc = 1; last foo; } if (/^def/) { $def = 1; last foo; } if (/^xyz/) { $xyz = 1; last foo; } $nothing = 1; } There is no official switch statement in perl, because there are already several ways to write the equivalent. In addition to the above, you could write foo: { $abc = 1, last foo if /^abc/; $def = 1, last foo if /^def/; $xyz = 1, last foo if /^xyz/; $nothing = 1; } or foo: { /^abc/ && do { $abc = 1; last foo; }; /^def/ && do { $def = 1; last foo; }; /^xyz/ && do { $xyz = 1; last foo; }; $nothing = 1; } or foo: { /^abc/ && ($abc = 1, last foo); /^def/ && ($def = 1, last foo); /^xyz/ && ($xyz = 1, last foo); $nothing = 1; } or even Release 4.0 Patchlevel 19 18 PERL(1) PERL(1) if (/^abc/) { $abc = 1; } elsif (/^def/) { $def = 1; } elsif (/^xyz/) { $xyz = 1; } else {$nothing = 1;} As it happens, these are all optimized internally to a switch structure, so perl jumps directly to the desired statement, and you needn't worry about perl executing a lot of unnecessary statements when you have a string of 50 elsifs, as long as you are testing the same simple scalar variable using ==, eq, or pattern matching as above. (If you're curious as to whether the optimizer has done this for a particular case statement, you can use the -D1024 switch to list the syntax tree before execution.) Simple statements The only kind of simple statement is an expression evalu- ated for its side effects. Every expression (simple statement) must be terminated with a semicolon. Note that this is like C, but unlike Pascal (and awk). Any simple statement may optionally be followed by a sin- gle modifier, just before the terminating semicolon. The possible modifiers are: if EXPR unless EXPR while EXPR until EXPR The if and unless modifiers have the expected semantics. The while and until modifiers also have the expected semantics (conditional evaluated first), except when applied to a do-BLOCK or a do-SUBROUTINE command, in which case the block executes once before the conditional is evaluated. This is so that you can write loops like: do { $_ = ; ... } until $_ eq ".\n"; (See the do operator below. Note also that the loop con- trol commands described later will NOT work in this con- struct, since modifiers don't take loop labels. Sorry.) Release 4.0 Patchlevel 19 19 PERL(1) PERL(1) Expressions Since perl expressions work almost exactly like C expres- sions, only the differences will be mentioned here. Here's what perl has that C doesn't: ** The exponentiation operator. **= The exponentiation assignment operator. () The null list, used to initialize an array to null. . Concatenation of two strings. .= The concatenation assignment operator. eq String equality (== is numeric equality). For a mnemonic just think of "eq" as a string. (If you are used to the awk behavior of using == for either string or numeric equality based on the current form of the comparands, beware! You must be explicit here.) ne String inequality (!= is numeric inequality). lt String less than. gt String greater than. le String less than or equal. ge String greater than or equal. cmp String comparison, returning -1, 0, or 1. <=> Numeric comparison, returning -1, 0, or 1. =~ Certain operations search or modify the string "$_" by default. This operator makes that kind of operation work on some other string. The right argument is a search pattern, substitution, or translation. The left argument is what is sup- posed to be searched, substituted, or translated instead of the default "$_". The return value indicates the success of the operation. (If the right argument is an expression other than a search pattern, substitution, or translation, it is interpreted as a search pattern at run time. This is less efficient than an explicit search, since the pattern must be compiled every time the expression is evaluated.) The precedence of this operator is lower than unary minus and Release 4.0 Patchlevel 19 20 PERL(1) PERL(1) autoincrement/decrement, but higher than every- thing else. !~ Just like =~ except the return value is negated. x The repetition operator. Returns a string con- sisting of the left operand repeated the number of times specified by the right operand. In an array context, if the left operand is a list in parens, it repeats the list. print '-' x 80; # print row of dashes print '-' x80; # illegal, x80 is identifier print "\t" x ($tab/8), ' ' x ($tab%8); # tab over @ones = (1) x 80; # an array of 80 1's @ones = (5) x @ones; # set all elements to 5 x= The repetition assignment operator. Only works on scalars. .. The range operator, which is really two different operators depending on the context. In an array context, returns an array of values counting (by ones) from the left value to the right value. This is useful for writing "for (1..10)" loops and for doing slice operations on arrays. In a scalar context, .. returns a boolean value. The operator is bistable, like a flip-flop.. Each .. operator maintains its own boolean state. It is false as long as its left operand is false. Once the left operand is true, the range operator stays true until the right operand is true, AFTER which the range operator becomes false again. (It doesn't become false till the next time the range operator is evaluated. It can become false on the same evaluation it became true, but it still returns true once.) The right operand is not evaluated while the operator is in the "false" state, and the left operand is not evaluated while the operator is in the "true" state. The scalar .. operator is primarily intended for doing line number ranges after the fashion of sed or awk. The precedence is a little lower than || and &&. The value returned is either the null string for false, or a sequence number (beginning with 1) for true. The sequence number is reset for each range encountered. The final sequence number in a range has the string 'E0' appended to it, which doesn't affect its numeric value, but gives you something to search for if you want to exclude the endpoint. Release 4.0 Patchlevel 19 21 PERL(1) PERL(1) You can exclude the beginning point by waiting for the sequence number to be greater than 1. If either operand of scalar .. is static, that operand is implicitly compared to the $. variable, the current line number. Examples: As a scalar operator: if (101 .. 200) { print; } # print 2nd hundred lines next line if (1 .. /^$/); # skip header lines s/^/> / if (/^$/ .. eof()); # quote body As an array operator: for (101 .. 200) { print; } # print $_ 100 times @foo = @foo[$[ .. $#foo]; # an expensive no-op @foo = @foo[$#foo-4 .. $#foo]; # slice last 5 items -x A file test. This unary operator takes one argu- ment, either a filename or a filehandle, and tests the associated file to see if something is true about it. If the argument is omitted, tests $_, except for -t, which tests STDIN. It returns 1 for true and '' for false, or the undefined value if the file doesn't exist. Precedence is higher than logical and relational operators, but lower than arithmetic operators. The operator may be any of: -r File is readable by effective uid. -w File is writable by effective uid. -x File is executable by effective uid. -o File is owned by effective uid. -R File is readable by real uid. -W File is writable by real uid. -X File is executable by real uid. -O File is owned by real uid. -e File exists. -z File has zero size. -s File has non-zero size (returns size). -f File is a plain file. -d File is a directory. -l File is a symbolic link. -p File is a named pipe (FIFO). -S File is a socket. -b File is a block special file. -c File is a character special file. -u File has setuid bit set. -g File has setgid bit set. -k File has sticky bit set. -t Filehandle is opened to a tty. -T File is a text file. -B File is a binary file (opposite of -T). Release 4.0 Patchlevel 19 22 PERL(1) PERL(1) -M Age of file in days when script started. -A Same for access time. -C Same for inode change time. The interpretation of the file permission opera- tors -r, -R, -w, -W, -x and -X is based solely on the mode of the file and the uids and gids of the user. There may be other reasons you can't actu- ally read, write or execute the file. Also note that, for the superuser, -r, -R, -w and -W always return 1, and -x and -X return 1 if any execute bit is set in the mode. Scripts run by the supe- ruser may thus need to do a stat() in order to determine the actual mode of the file, or tem- porarily set the uid to something else. Example: while (<>) { chop; next unless -f $_; # ignore specials ... } Note that -s/a/b/ does not do a negated substitu- tion. Saying -exp($foo) still works as expected, however--only single letters following a minus are interpreted as file tests. The -T and -B switches work as follows. The first block or so of the file is examined for odd char- acters such as strange control codes or metachar- acters. If too many odd characters (>10%) are found, it's a -B file, otherwise it's a -T file. Also, any file containing null in the first block is considered a binary file. If -T or -B is used on a filehandle, the current stdio buffer is exam- ined rather than the first block. Both -T and -B return TRUE on a null file, or a file at EOF when testing a filehandle. If any of the file tests (or either stat operator) are given the special filehandle consisting of a solitary underline, then the stat structure of the previous file test (or stat operator) is used, saving a system call. (This doesn't work with -t, and you need to remember that lstat and -l will leave values in the stat structure for the symbolic link, not the real file.) Example: print "Can do.\n" if -r $a || -w _ || -x _; Release 4.0 Patchlevel 19 23 PERL(1) PERL(1) stat($filename); print "Readable\n" if -r _; print "Writable\n" if -w _; print "Executable\n" if -x _; print "Setuid\n" if -u _; print "Setgid\n" if -g _; print "Sticky\n" if -k _; print "Text\n" if -T _; print "Binary\n" if -B _; Here is what C has that perl doesn't: unary & Address-of operator. unary * Dereference-address operator. (TYPE) Type casting operator. Like C, perl does a certain amount of expression evalua- tion at compile time, whenever it determines that all of the arguments to an operator are static and have no side effects. In particular, string concatenation happens at compile time between literals that don't do variable sub- stitution. Backslash interpretation also happens at com- pile time. You can say 'Now is the time for all' . "\n" . 'good men to come to.' and this all reduces to one string internally. The autoincrement operator has a little extra built-in magic to it. If you increment a variable that is numeric, or that has ever been used in a numeric context, you get a normal increment. If, however, the variable has only been used in string contexts since it was set, and has a value that is not null and matches the pattern /^[a-zA-Z]*[0-9]*$/, the increment is done as a string, preserving each character within its range, with carry: print ++($foo = '99'); # prints '100' print ++($foo = 'a0'); # prints 'a1' print ++($foo = 'Az'); # prints 'Ba' print ++($foo = 'zz'); # prints 'aaa' The autodecrement is not magical. The range operator (in an array context) makes use of the magical autoincrement algorithm if the minimum and maximum are strings. You can say @alphabet = ('A' .. 'Z'); Release 4.0 Patchlevel 19 24 PERL(1) PERL(1) to get all the letters of the alphabet, or $hexdigit = (0 .. 9, 'a' .. 'f')[$num & 15]; to get a hexadecimal digit, or @z2 = ('01' .. '31'); print @z2[$mday]; to get dates with leading zeros. (If the final value specified is not in the sequence that the magical incre- ment would produce, the sequence goes until the next value would be longer than the final value specified.) The || and && operators differ from C's in that, rather than returning 0 or 1, they return the last value evalu- ated. Thus, a portable way to find out the home directory might be: $home = $ENV{'HOME'} || $ENV{'LOGDIR'} || (getpwuid($<))[7] || die "You're homeless!\n"; Along with the literals and variables mentioned earlier, the operations in the following section can serve as terms in an expression. Some of these operations take a LIST as an argument. Such a list can consist of any combination of scalar arguments or array values; the array values will be included in the list as if each individual element were interpolated at that point in the list, forming a longer single-dimensional array value. Elements of the LIST should be separated by commas. If an operation is listed both with and without parentheses around its arguments, it means you can either use it as a unary operator or as a function call. To use it as a function call, the next token on the same line must be a left parenthesis. (There may be intervening white space.) Such a function then has highest precedence, as you would expect from a function. If any token other than a left parenthesis follows, then it is a unary operator, with a precedence depending only on whether it is a LIST operator or not. LIST operators have lowest precedence. All other unary operators have a precedence greater than relational operators but less than arithmetic operators. See the section on Precedence. /PATTERN/ See m/PATTERN/. ?PATTERN? This is just like the /pattern/ search, except that it matches only once between calls to the reset operator. This is a useful optimization when you only want to see the first occurrence of something in each file of a set of files, for instance. Only ?? patterns local to the current Release 4.0 Patchlevel 19 25 PERL(1) PERL(1) package are reset. accept(NEWSOCKET,GENERICSOCKET) Does the same thing that the accept system call does. Returns true if it succeeded, false other- wise. See example in section on Interprocess Com- munication. alarm(SECONDS) alarm SECONDS Arranges to have a SIGALRM delivered to this pro- cess after the specified number of seconds (minus 1, actually) have elapsed. Thus, alarm(15) will cause a SIGALRM at some point more than 14 seconds in the future. Only one timer may be counting at once. Each call disables the previous timer, and an argument of 0 may be supplied to cancel the previous timer without starting a new one. The returned value is the amount of time remaining on the previous timer. atan2(Y,X) Returns the arctangent of Y/X in the range -PI to PI. bind(SOCKET,NAME) Does the same thing that the bind system call does. Returns true if it succeeded, false other- wise. NAME should be a packed address of the proper type for the socket. See example in sec- tion on Interprocess Communication. binmode(FILEHANDLE) binmode FILEHANDLE Arranges for the file to be read in "binary" mode in operating systems that distinguish between binary and text files. Files that are not read in binary mode have CR LF sequences translated to LF on input and LF translated to CR LF on output. Binmode has no effect under Unix. If FILEHANDLE is an expression, the value is taken as the name of the filehandle. caller(EXPR) caller Returns the context of the current subroutine call: ($package,$filename,$line) = caller; With EXPR, returns some extra information that the debugger uses to print a stack trace. The value Release 4.0 Patchlevel 19 26 PERL(1) PERL(1) of EXPR indicates how many call frames to go back before the current one. chdir(EXPR) chdir EXPR Changes the working directory to EXPR, if possi- ble. If EXPR is omitted, changes to home direc- tory. Returns 1 upon success, 0 otherwise. See example under die. chmod(LIST) chmod LIST Changes the permissions of a list of files. The first element of the list must be the numerical mode. Returns the number of files successfully changed. $cnt = chmod 0755, 'foo', 'bar'; chmod 0755, @executables; chop(LIST) chop(VARIABLE) chop VARIABLE chop Chops off the last character of a string and returns the character chopped. It's used primar- ily to remove the newline from the end of an input record, but is much more efficient than s/\n// because it neither scans nor copies the string. If VARIABLE is omitted, chops $_. Example: while (<>) { chop; # avoid \n on last field @array = split(/:/); ... } You can actually chop anything that's an lvalue, including an assignment: chop($cwd = `pwd`); chop($answer = ); If you chop a list, each element is chopped. Only the value of the last chop is returned. chown(LIST) Release 4.0 Patchlevel 19 27 PERL(1) PERL(1) chown LIST Changes the owner (and group) of a list of files. The first two elements of the list must be the NUMERICAL uid and gid, in that order. Returns the number of files successfully changed. $cnt = chown $uid, $gid, 'foo', 'bar'; chown $uid, $gid, @filenames; Here's an example that looks up non-numeric uids in the passwd file: print "User: "; $user = ; chop($user); print "Files: " $pattern = ; chop($pattern); open(pass, '/etc/passwd') || die "Can't open passwd: $!\n"; while () { ($login,$pass,$uid,$gid) = split(/:/); $uid{$login} = $uid; $gid{$login} = $gid; } @ary = <${pattern}>; # get filenames if ($uid{$user} eq '') { die "$user not in passwd file"; } else { chown $uid{$user}, $gid{$user}, @ary; } chroot(FILENAME) chroot FILENAME Does the same as the system call of that name. If you don't know what it does, don't worry about it. If FILENAME is omitted, does chroot to $_. close(FILEHANDLE) close FILEHANDLE Closes the file or pipe associated with the file handle. You don't have to close FILEHANDLE if you are immediately going to do another open on it, since open will close it for you. (See open.) However, an explicit close on an input file resets the line counter ($.), while the implicit close done by open does not. Also, closing a pipe will wait for the process executing on the pipe to com- plete, in case you want to look at the output of the pipe afterwards. Closing a pipe explicitly Release 4.0 Patchlevel 19 28 PERL(1) PERL(1) also puts the status value of the command into $?. Example: open(OUTPUT, '|sort >foo'); # pipe to sort ... # print stuff to output close OUTPUT; # wait for sort to finish open(INPUT, 'foo'); # get sort's results FILEHANDLE may be an expression whose value gives the real filehandle name. closedir(DIRHANDLE) closedir DIRHANDLE Closes a directory opened by opendir(). connect(SOCKET,NAME) Does the same thing that the connect system call does. Returns true if it succeeded, false other- wise. NAME should be a package address of the proper type for the socket. See example in sec- tion on Interprocess Communication. cos(EXPR) cos EXPR Returns the cosine of EXPR (expressed in radians). If EXPR is omitted takes cosine of $_. crypt(PLAINTEXT,SALT) Encrypts a string exactly like the crypt() func- tion in the C library. Useful for checking the password file for lousy passwords. Only the guys wearing white hats should do this. dbmclose(ASSOC_ARRAY) dbmclose ASSOC_ARRAY Breaks the binding between a dbm file and an asso- ciative array. The values remaining in the asso- ciative array are meaningless unless you happen to want to know what was in the cache for the dbm file. This function is only useful if you have ndbm. dbmopen(ASSOC,DBNAME,MODE) This binds a dbm or ndbm file to an associative array. ASSOC is the name of the associative array. (Unlike normal open, the first argument is NOT a filehandle, even though it looks like one). DBNAME is the name of the database (without the .dir or .pag extension). If the database does not exist, it is created with protection specified by MODE (as modified by the umask). If your system Release 4.0 Patchlevel 19 29 PERL(1) PERL(1) only supports the older dbm functions, you may perform only one dbmopen in your program. If your system has neither dbm nor ndbm, calling dbmopen produces a fatal error. Values assigned to the associative array prior to the dbmopen are lost. A certain number of values from the dbm file are cached in memory. By default this number is 64, but you can increase it by preallocating that number of garbage entries in the associative array before the dbmopen. You can flush the cache if necessary with the reset com- mand. If you don't have write access to the dbm file, you can only read associative array variables, not set them. If you want to test whether you can write, either use file tests or try setting a dummy array entry inside an eval, which will trap the error. Note that functions such as keys() and values() may return huge array values when used on large dbm files. You may prefer to use the each() func- tion to iterate over large dbm files. Example: # print out history file offsets dbmopen(HIST,'/usr/lib/news/history',0666); while (($key,$val) = each %HIST) { print $key, ' = ', unpack('L',$val), "\n"; } dbmclose(HIST); defined(EXPR) defined EXPR Returns a boolean value saying whether the lvalue EXPR has a real value or not. Many operations return the undefined value under exceptional con- ditions, such as end of file, uninitialized vari- able, system error and such. This function allows you to distinguish between an undefined null string and a defined null string with operations that might return a real null string, in particu- lar referencing elements of an array. You may also check to see if arrays or subroutines exist. Use on predefined variables is not guaranteed to produce intuitive results. Examples: Release 4.0 Patchlevel 19 30 PERL(1) PERL(1) print if defined $switch{'D'}; print "$val\n" while defined($val = pop(@ary)); die "Can't readlink $sym: $!" unless defined($value = readlink $sym); eval '@foo = ()' if defined(@foo); die "No XYZ package defined" unless defined %_XYZ; sub foo { defined &$bar ? &$bar(@_) : die "No bar"; } See also undef. delete $ASSOC{KEY} Deletes the specified value from the specified associative array. Returns the deleted value, or the undefined value if nothing was deleted. Deleting from $ENV{} modifies the environment. Deleting from an array bound to a dbm file deletes the entry from the dbm file. The following deletes all the values of an asso- ciative array: foreach $key (keys %ARRAY) { delete $ARRAY{$key}; } (But it would be faster to use the reset command. Saying undef %ARRAY is faster yet.) die(LIST) die LIST Outside of an eval, prints the value of LIST to STDERR and exits with the current value of $! (errno). If $! is 0, exits with the value of ($? >> 8) (`command` status). If ($? >> 8) is 0, exits with 255. Inside an eval, the error message is stuffed into $@ and the eval is terminated with the undefined value. Equivalent examples: die "Can't cd to spool: $!\n" unless chdir '/usr/spool/news'; chdir '/usr/spool/news' || die "Can't cd to spool: $!\n" If the value of EXPR does not end in a newline, the current script line number and input line num- ber (if any) are also printed, and a newline is supplied. Hint: sometimes appending ", stopped" to your message will cause it to make better sense when the string "at foo line 123" is appended. Suppose you are running script "canasta". Release 4.0 Patchlevel 19 31 PERL(1) PERL(1) die "/etc/games is no good"; die "/etc/games is no good, stopped"; produce, respectively /etc/games is no good at canasta line 123. /etc/games is no good, stopped at canasta line 123. See also exit. do BLOCK Returns the value of the last command in the sequence of commands indicated by BLOCK. When modified by a loop modifier, executes the BLOCK once before testing the loop condition. (On other statements the loop modifiers test the conditional first.) do SUBROUTINE (LIST) Executes a SUBROUTINE declared by a sub declara- tion, and returns the value of the last expression evaluated in SUBROUTINE. If there is no subrou- tine by that name, produces a fatal error. (You may use the "defined" operator to determine if a subroutine exists.) If you pass arrays as part of LIST you may wish to pass the length of the array in front of each array. (See the section on sub- routines later on.) The parentheses are required to avoid confusion with the "do EXPR" form. SUBROUTINE may also be a single scalar variable, in which case the name of the subroutine to exe- cute is taken from the variable. As an alternate (and preferred) form, you may call a subroutine by prefixing the name with an amper- sand: &foo(@args). If you aren't passing any arguments, you don't have to use parentheses. If you omit the parentheses, no @_ array is passed to the subroutine. The & form is also used to spec- ify subroutines to the defined and undef opera- tors: if (defined &$var) { &$var($parm); undef &$var; } do EXPR Uses the value of EXPR as a filename and executes the contents of the file as a perl script. Its primary use is to include subroutines from a perl subroutine library. do 'stat.pl'; is just like Release 4.0 Patchlevel 19 32 PERL(1) PERL(1) eval `cat stat.pl`; except that it's more efficient, more concise, keeps track of the current filename for error mes- sages, and searches all the -I libraries if the file isn't in the current directory (see also the @INC array in Predefined Names). It's the same, however, in that it does reparse the file every time you call it, so if you are going to use the file inside a loop you might prefer to use -P and #include, at the expense of a little more startup time. (The main problem with #include is that cpp doesn't grok # comments--a workaround is to use ";#" for standalone comments.) Note that the fol- lowing are NOT equivalent: do $foo; # eval a file do $foo(); # call a subroutine Note that inclusion of library routines is better done with the "require" operator. dump LABEL This causes an immediate core dump. Primarily this is so that you can use the undump program to turn your core dump into an executable binary after having initialized all your variables at the beginning of the program. When the new binary is executed it will begin by executing a "goto LABEL" (with all the restrictions that goto suffers). Think of it as a goto with an intervening core dump and reincarnation. If LABEL is omitted, restarts the program from the top. WARNING: any files opened at the time of the dump will NOT be open any more when the program is reincarnated, with possible resulting confusion on the part of perl. See also -u. Example: Release 4.0 Patchlevel 19 33 PERL(1) PERL(1) #!/usr/bin/perl require 'getopt.pl'; require 'stat.pl'; %days = ( 'Sun',1, 'Mon',2, 'Tue',3, 'Wed',4, 'Thu',5, 'Fri',6, 'Sat',7); dump QUICKSTART if $ARGV[0] eq '-d'; QUICKSTART: do Getopt('f'); each(ASSOC_ARRAY) each ASSOC_ARRAY Returns a 2 element array consisting of the key and value for the next value of an associative array, so that you can iterate over it. Entries are returned in an apparently random order. When the array is entirely read, a null array is returned (which when assigned produces a FALSE (0) value). The next call to each() after that will start iterating again. The iterator can be reset only by reading all the elements from the array. You must not modify the array while iterating over it. There is a single iterator for each associa- tive array, shared by all each(), keys() and val- ues() function calls in the program. The follow- ing prints out your environment like the printenv program, only in a different order: while (($key,$value) = each %ENV) { print "$key=$value\n"; } See also keys() and values(). eof(FILEHANDLE) eof() eof Returns 1 if the next read on FILEHANDLE will return end of file, or if FILEHANDLE is not open. FILEHANDLE may be an expression whose value gives the real filehandle name. (Note that this func- tion actually reads a character and then ungetc's it, so it is not very useful in an interactive context.) An eof without an argument returns the Release 4.0 Patchlevel 19 34 PERL(1) PERL(1) eof status for the last file read. Empty paren- theses () may be used to indicate the pseudo file formed of the files listed on the command line, i.e. eof() is reasonable to use inside a while (<>) loop to detect the end of only the last file. Use eof(ARGV) or eof without the parentheses to test EACH file in a while (<>) loop. Examples: # insert dashes just before last line of last file while (<>) { if (eof()) { print "--------------\n"; } print; } # reset line numbering on each input file while (<>) { print "$.\t$_"; if (eof) { # Not eof(). close(ARGV); } } eval(EXPR) eval EXPR eval BLOCK EXPR is parsed and executed as if it were a little perl program. It is executed in the context of the current perl program, so that any variable settings, subroutine or format definitions remain afterwards. The value returned is the value of the last expression evaluated, just as with sub- routines. If there is a syntax error or runtime error, or a die statement is executed, an unde- fined value is returned by eval, and $@ is set to the error message. If there was no error, $@ is guaranteed to be a null string. If EXPR is omit- ted, evaluates $_. The final semicolon, if any, may be omitted from the expression. Note that, since eval traps otherwise-fatal errors, it is useful for determining whether a particular feature (such as dbmopen or symlink) is implemented. It is also Perl's exception trapping mechanism, where the die operator is used to raise exceptions. If the code to be executed doesn't vary, you may use the eval-BLOCK form to trap run-time errors without incurring the penalty of recompiling each Release 4.0 Patchlevel 19 35 PERL(1) PERL(1) time. The error, if any, is still returned in $@. Evaluating a single-quoted string (as EXPR) has the same effect, except that the eval-EXPR form reports syntax errors at run time via $@, whereas the eval-BLOCK form reports syntax errors at com- pile time. The eval-EXPR form is optimized to eval-BLOCK the first time it succeeds. (Since the replacement side of a substitution is considered a single-quoted string when you use the e modifier, the same optimization occurs there.) Examples: # make divide-by-zero non-fatal eval { $answer = $a / $b; }; warn $@ if $@; # optimized to same thing after first use eval '$answer = $a / $b'; warn $@ if $@; # a compile-time error eval { $answer = }; # a run-time error eval '$answer ='; # sets $@ exec(LIST) exec LIST If there is more than one argument in LIST, or if LIST is an array with more than one value, calls execvp() with the arguments in LIST. If there is only one scalar argument, the argument is checked for shell metacharacters. If there are any, the entire argument is passed to "/bin/sh -c" for parsing. If there are none, the argument is split into words and passed directly to execvp(), which is more efficient. Note: exec (and system) do not flush your output buffer, so you may need to set $| to avoid lost output. Examples: exec '/bin/echo', 'Your arguments are: ', @ARGV; exec "sort $outfile | uniq"; If you don't really want to execute the first argument, but want to lie to the program you are executing about its own name, you can specify the program you actually want to run by assigning that to a variable and putting the name of the variable in front of the LIST without a comma. (This always forces interpretation of the LIST as a multi-valued list, even if there is only a single scalar in the list.) Example: Release 4.0 Patchlevel 19 36 PERL(1) PERL(1) $shell = '/bin/csh'; exec $shell '-sh'; # pretend it's a login shell exit(EXPR) exit EXPR Evaluates EXPR and exits immediately with that value. Example: $ans = ; exit 0 if $ans =~ /^[Xx]/; See also die. If EXPR is omitted, exits with 0 status. exp(EXPR) exp EXPR Returns e to the power of EXPR. If EXPR is omit- ted, gives exp($_). fcntl(FILEHANDLE,FUNCTION,SCALAR) Implements the fcntl(2) function. You'll probably have to say require "fcntl.ph"; # probably /usr/local/lib/perl/fcntl.ph first to get the correct function definitions. If fcntl.ph doesn't exist or doesn't have the correct definitions you'll have to roll your own, based on your C header files such as . (There is a perl script called h2ph that comes with the perl kit which may help you in this.) Argument processing and value return works just like ioctl below. Note that fcntl will produce a fatal error if used on a machine that doesn't implement fcntl(2). fileno(FILEHANDLE) fileno FILEHANDLE Returns the file descriptor for a filehandle. Useful for constructing bitmaps for select(). If FILEHANDLE is an expression, the value is taken as the name of the filehandle. flock(FILEHANDLE,OPERATION) Calls flock(2) on FILEHANDLE. See manual page for flock(2) for definition of OPERATION. Returns true for success, false on failure. Will produce a fatal error if used on a machine that doesn't implement flock(2). Here's a mailbox appender for BSD systems. Release 4.0 Patchlevel 19 37 PERL(1) PERL(1) $LOCK_SH = 1; $LOCK_EX = 2; $LOCK_NB = 4; $LOCK_UN = 8; sub lock { flock(MBOX,$LOCK_EX); # and, in case someone appended # while we were waiting... seek(MBOX, 0, 2); } sub unlock { flock(MBOX,$LOCK_UN); } open(MBOX, ">>/usr/spool/mail/$ENV{'USER'}") || die "Can't open mailbox: $!"; do lock(); print MBOX $msg,"\n\n"; do unlock(); fork Does a fork() call. Returns the child pid to the parent process and 0 to the child process. Note: unflushed buffers remain unflushed in both pro- cesses, which means you may need to set $| to avoid duplicate output. getc(FILEHANDLE) getc FILEHANDLE getc Returns the next character from the input file attached to FILEHANDLE, or a null string at EOF. If FILEHANDLE is omitted, reads from STDIN. getlogin Returns the current login from /etc/utmp, if any. If null, use getpwuid. $login = getlogin || (getpwuid($<))[0] || "Somebody"; getpeername(SOCKET) Returns the packed sockaddr address of other end of the SOCKET connection. # An internet sockaddr $sockaddr = 'S n a4 x8'; $hersockaddr = getpeername(S); ($family, $port, $heraddr) = Release 4.0 Patchlevel 19 38 PERL(1) PERL(1) unpack($sockaddr,$hersockaddr); getpgrp(PID) getpgrp PID Returns the current process group for the speci- fied PID, 0 for the current process. Will produce a fatal error if used on a machine that doesn't implement getpgrp(2). If EXPR is omitted, returns process group of current process. getppid Returns the process id of the parent process. getpriority(WHICH,WHO) Returns the current priority for a process, a pro- cess group, or a user. (See getpriority(2).) Will produce a fatal error if used on a machine that doesn't implement getpriority(2). getpwnam(NAME) getgrnam(NAME) gethostbyname(NAME) getnetbyname(NAME) getprotobyname(NAME) getpwuid(UID) getgrgid(GID) getservbyname(NAME,PROTO) gethostbyaddr(ADDR,ADDRTYPE) getnetbyaddr(ADDR,ADDRTYPE) getprotobynumber(NUMBER) getservbyport(PORT,PROTO) getpwent getgrent gethostent getnetent getprotoent Release 4.0 Patchlevel 19 39 PERL(1) PERL(1) getservent setpwent setgrent sethostent(STAYOPEN) setnetent(STAYOPEN) setprotoent(STAYOPEN) setservent(STAYOPEN) endpwent endgrent endhostent endnetent endprotoent endservent These routines perform the same functions as their counterparts in the system library. The return values from the various get routines are as fol- lows: ($name,$passwd,$uid,$gid, $quota,$comment,$gcos,$dir,$shell) = getpw... ($name,$passwd,$gid,$members) = getgr... ($name,$aliases,$addrtype,$length,@addrs) = gethost... ($name,$aliases,$addrtype,$net) = getnet... ($name,$aliases,$proto) = getproto... ($name,$aliases,$port,$proto) = getserv... The $members value returned by getgr... is a space separated list of the login names of the members of the group. The @addrs value returned by the gethost... func- tions is a list of the raw addresses returned by the corresponding system library call. In the Internet domain, each address is four bytes long and you can unpack it by saying something like: ($a,$b,$c,$d) = unpack('C4',$addr[0]); getsockname(SOCKET) Returns the packed sockaddr address of this end of the SOCKET connection. Release 4.0 Patchlevel 19 40 PERL(1) PERL(1) # An internet sockaddr $sockaddr = 'S n a4 x8'; $mysockaddr = getsockname(S); ($family, $port, $myaddr) = unpack($sockaddr,$mysockaddr); getsockopt(SOCKET,LEVEL,OPTNAME) Returns the socket option requested, or undefined if there is an error. gmtime(EXPR) gmtime EXPR Converts a time as returned by the time function to a 9-element array with the time analyzed for the Greenwich timezone. Typically used as fol- lows: ($sec,$min,$hour,$mday,$mon,$year,$wday,$yday,$isdst) = gmtime(time); All array elements are numeric, and come straight out of a struct tm. In particular this means that $mon has the range 0..11 and $wday has the range 0..6. If EXPR is omitted, does gmtime(time). goto LABEL Finds the statement labeled with LABEL and resumes execution there. Currently you may only go to statements in the main body of the program that are not nested inside a do {} construct. This statement is not implemented very efficiently, and is here only to make the sed-to-perl translator easier. I may change its semantics at any time, consistent with support for translated sed scripts. Use it at your own risk. Better yet, don't use it at all. grep(EXPR,LIST) Evaluates EXPR for each element of LIST (locally setting $_ to each element) and returns the array value consisting of those elements for which the expression evaluated to true. In a scalar con- text, returns the number of times the expression was true. @foo = grep(!/^#/, @bar); # weed out comments Note that, since $_ is a reference into the array value, it can be used to modify the elements of the array. While this is useful and supported, it can cause bizarre results if the LIST is not a named array. Release 4.0 Patchlevel 19 41 PERL(1) PERL(1) hex(EXPR) hex EXPR Returns the decimal value of EXPR interpreted as an hex string. (To interpret strings that might start with 0 or 0x see oct().) If EXPR is omit- ted, uses $_. index(STR,SUBSTR,POSITION) index(STR,SUBSTR) Returns the position of the first occurrence of SUBSTR in STR at or after POSITION. If POSITION is omitted, starts searching from the beginning of the string. The return value is based at 0, or whatever you've set the $[ variable to. If the substring is not found, returns one less than the base, ordinarily -1. int(EXPR) int EXPR Returns the integer portion of EXPR. If EXPR is omitted, uses $_. ioctl(FILEHANDLE,FUNCTION,SCALAR) Implements the ioctl(2) function. You'll probably have to say require "ioctl.ph"; # probably /usr/local/lib/perl/ioctl.ph first to get the correct function definitions. If ioctl.ph doesn't exist or doesn't have the correct definitions you'll have to roll your own, based on your C header files such as . (There is a perl script called h2ph that comes with the perl kit which may help you in this.) SCALAR will be read and/or written depending on the FUNC- TION--a pointer to the string value of SCALAR will be passed as the third argument of the actual ioctl call. (If SCALAR has no string value but does have a numeric value, that value will be passed rather than a pointer to the string value. To guarantee this to be true, add a 0 to the scalar before using it.) The pack() and unpack() functions are useful for manipulating the values of structures used by ioctl(). The following example sets the erase character to DEL. Release 4.0 Patchlevel 19 42 PERL(1) PERL(1) require 'ioctl.ph'; $sgttyb_t = "ccccs"; # 4 chars and a short if (ioctl(STDIN,$TIOCGETP,$sgttyb)) { @ary = unpack($sgttyb_t,$sgttyb); $ary[2] = 127; $sgttyb = pack($sgttyb_t,@ary); ioctl(STDIN,$TIOCSETP,$sgttyb) || die "Can't ioctl: $!"; } The return value of ioctl (and fcntl) is as fol- lows: if OS returns: perl returns: -1 undefined value 0 string "0 but true" anything else that number Thus perl returns true on success and false on failure, yet you can still easily determine the actual value returned by the operating system: ($retval = ioctl(...)) || ($retval = -1); printf "System returned %d\n", $retval; join(EXPR,LIST) join(EXPR,ARRAY) Joins the separate strings of LIST or ARRAY into a single string with fields separated by the value of EXPR, and returns the string. Example: $_ = join(':', $login,$passwd,$uid,$gid,$gcos,$home,$shell); See split. keys(ASSOC_ARRAY) keys ASSOC_ARRAY Returns a normal array consisting of all the keys of the named associative array. The keys are returned in an apparently random order, but it is the same order as either the values() or each() function produces (given that the associative array has not been modified). Here is yet another way to print your environment: @keys = keys %ENV; @values = values %ENV; while ($#keys >= 0) { print pop(@keys), '=', pop(@values), "\n"; } Release 4.0 Patchlevel 19 43 PERL(1) PERL(1) or how about sorted by key: foreach $key (sort(keys %ENV)) { print $key, '=', $ENV{$key}, "\n"; } kill(LIST) kill LIST Sends a signal to a list of processes. The first element of the list must be the signal to send. Returns the number of processes successfully sig- naled. $cnt = kill 1, $child1, $child2; kill 9, @goners; If the signal is negative, kills process groups instead of processes. (On System V, a negative process number will also kill process groups, but that's not portable.) You may use a signal name in quotes. last LABEL last The last command is like the break statement in C (as used in loops); it immediately exits the loop in question. If the LABEL is omitted, the command refers to the innermost enclosing loop. The con- tinue block, if any, is not executed: line: while () { last line if /^$/; # exit when done with header ... } length(EXPR) length EXPR Returns the length in characters of the value of EXPR. If EXPR is omitted, returns length of $_. link(OLDFILE,NEWFILE) Creates a new filename linked to the old filename. Returns 1 for success, 0 otherwise. listen(SOCKET,QUEUESIZE) Does the same thing that the listen system call does. Returns true if it succeeded, false other- wise. See example in section on Interprocess Com- munication. Release 4.0 Patchlevel 19 44 PERL(1) PERL(1) local(LIST) Declares the listed variables to be local to the enclosing block, subroutine, eval or "do". All the listed elements must be legal lvalues. This operator works by saving the current values of those variables in LIST on a hidden stack and restoring them upon exiting the block, subroutine or eval. This means that called subroutines can also reference the local variable, but not the global one. The LIST may be assigned to if desired, which allows you to initialize your local variables. (If no initializer is given for a par- ticular variable, it is created with an undefined value.) Commonly this is used to name the parame- ters to a subroutine. Examples: sub RANGEVAL { local($min, $max, $thunk) = @_; local($result) = ''; local($i); # Presumably $thunk makes reference to $i for ($i = $min; $i < $max; $i++) { $result .= eval $thunk; } $result; } if ($sw eq '-v') { # init local array with global array local(@ARGV) = @ARGV; unshift(@ARGV,'echo'); system @ARGV; } # @ARGV restored # temporarily add to digits associative array if ($base12) { # (NOTE: not claiming this is efficient!) local(%digits) = (%digits,'t',10,'e',11); do parse_num(); } Note that local() is a run-time command, and so gets executed every time through a loop, using up more stack storage each time until it's all released at once when the loop is exited. localtime(EXPR) localtime EXPR Converts a time as returned by the time function Release 4.0 Patchlevel 19 45 PERL(1) PERL(1) to a 9-element array with the time analyzed for the local timezone. Typically used as follows: ($sec,$min,$hour,$mday,$mon,$year,$wday,$yday,$isdst) = localtime(time); All array elements are numeric, and come straight out of a struct tm. In particular this means that $mon has the range 0..11 and $wday has the range 0..6. If EXPR is omitted, does localtime(time). log(EXPR) log EXPR Returns logarithm (base e) of EXPR. If EXPR is omitted, returns log of $_. lstat(FILEHANDLE) lstat FILEHANDLE lstat(EXPR) lstat SCALARVARIABLE Does the same thing as the stat() function, but stats a symbolic link instead of the file the sym- bolic link points to. If symbolic links are unim- plemented on your system, a normal stat is done. m/PATTERN/gio /PATTERN/gio Searches a string for a pattern match, and returns true (1) or false (''). If no string is specified via the =~ or !~ operator, the $_ string is searched. (The string specified with =~ need not be an lvalue--it may be the result of an expres- sion evaluation, but remember the =~ binds rather tightly.) See also the section on regular expres- sions. If / is the delimiter then the initial 'm' is optional. With the 'm' you can use any pair of non-alphanumeric characters as delimiters. This is particularly useful for matching Unix path names that contain '/'. If the final delimiter is followed by the optional letter 'i', the matching is done in a case-insensitive manner. PATTERN may contain references to scalar variables, which will be interpolated (and the pattern recompiled) every time the pattern search is evaluated. (Note that $) and $| may not be interpolated because they look like end-of-string tests.) If you want such a pattern to be compiled only once, add an "o" Release 4.0 Patchlevel 19 46 PERL(1) PERL(1) after the trailing delimiter. This avoids expen- sive run-time recompilations, and is useful when the value you are interpolating won't change over the life of the script. If the PATTERN evaluates to a null string, the most recent successful regu- lar expression is used instead. If used in a context that requires an array value, a pattern match returns an array consisting of the subexpressions matched by the parentheses in the pattern, i.e. ($1, $2, $3...). It does NOT actu- ally set $1, $2, etc. in this case, nor does it set $+, $`, $& or $'. If the match fails, a null array is returned. If the match succeeds, but there were no parentheses, an array value of (1) is returned. Examples: open(tty, '/dev/tty'); =~ /^y/i && do foo(); # do foo if desired if (/Version: *([0-9.]*)/) { $version = $1; } next if m#^/usr/spool/uucp#; # poor man's grep $arg = shift; while (<>) { print if /$arg/o; # compile only once } if (($F1, $F2, $Etc) = ($foo =~ /^(\S+)\s+(\S+)\s*(.*)/)) This last example splits $foo into the first two words and the remainder of the line, and assigns those three fields to $F1, $F2 and $Etc. The con- ditional is true if any variables were assigned, i.e. if the pattern matched. The "g" modifier specifies global pattern match- ing--that is, matching as many times as possible within the string. How it behaves depends on the context. In an array context, it returns a list of all the substrings matched by all the parenthe- ses in the regular expression. If there are no parentheses, it returns a list of all the matched strings, as if there were parentheses around the whole pattern. In a scalar context, it iterates through the string, returning TRUE each time it matches, and FALSE when it eventually runs out of matches. (In other words, it remembers where it left off last time and restarts the search at that point.) It presumes that you have not modified Release 4.0 Patchlevel 19 47 PERL(1) PERL(1) the string since the last match. Modifying the string between matches may result in undefined behavior. (You can actually get away with in- place modifications via substr() that do not change the length of the entire string. In gen- eral, however, you should be using s///g for such modifications.) Examples: # array context ($one,$five,$fifteen) = (`uptime` =~ /(\d+\.\d+)/g); # scalar context $/ = 1; $* = 1; while ($paragraph = <>) { while ($paragraph =~ /[a-z]['")]*[.!?]+['")]*\s/g) { $sentences++; } } print "$sentences\n"; mkdir(FILENAME,MODE) Creates the directory specified by FILENAME, with permissions specified by MODE (as modified by umask). If it succeeds it returns 1, otherwise it returns 0 and sets $! (errno). msgctl(ID,CMD,ARG) Calls the System V IPC function msgctl. If CMD is &IPC_STAT, then ARG must be a variable which will hold the returned msqid_ds structure. Returns like ioctl: the undefined value for error, "0 but true" for zero, or the actual return value other- wise. msgget(KEY,FLAGS) Calls the System V IPC function msgget. Returns the message queue id, or the undefined value if there is an error. msgsnd(ID,MSG,FLAGS) Calls the System V IPC function msgsnd to send the message MSG to the message queue ID. MSG must begin with the long integer message type, which may be created with pack("L", $type). Returns true if successful, or false if there is an error. msgrcv(ID,VAR,SIZE,TYPE,FLAGS) Calls the System V IPC function msgrcv to receive a message from message queue ID into variable VAR with a maximum message size of SIZE. Note that if a message is received, the message type will be the first thing in VAR, and the maximum length of VAR is SIZE plus the size of the message type. Release 4.0 Patchlevel 19 48 PERL(1) PERL(1) Returns true if successful, or false if there is an error. next LABEL next The next command is like the continue statement in C; it starts the next iteration of the loop: line: while () { next line if /^#/; # discard comments ... } Note that if there were a continue block on the above, it would get executed even on discarded lines. If the LABEL is omitted, the command refers to the innermost enclosing loop. oct(EXPR) oct EXPR Returns the decimal value of EXPR interpreted as an octal string. (If EXPR happens to start off with 0x, interprets it as a hex string instead.) The following will handle decimal, octal and hex in the standard notation: $val = oct($val) if $val =~ /^0/; If EXPR is omitted, uses $_. open(FILEHANDLE,EXPR) open(FILEHANDLE) open FILEHANDLE Opens the file whose filename is given by EXPR, and associates it with FILEHANDLE. If FILEHANDLE is an expression, its value is used as the name of the real filehandle wanted. If EXPR is omitted, the scalar variable of the same name as the FILE- HANDLE contains the filename. If the filename begins with "<" or nothing, the file is opened for input. If the filename begins with ">", the file is opened for output. If the filename begins with ">>", the file is opened for appending. (You can put a '+' in front of the '>' or '<' to indicate that you want both read and write access to the file.) If the filename begins with "|", the file- name is interpreted as a command to which output is to be piped, and if the filename ends with a "|", the filename is interpreted as command which pipes input to us. (You may not have a command that pipes both in and out.) Opening '-' opens Release 4.0 Patchlevel 19 49 PERL(1) PERL(1) STDIN and opening '>-' opens STDOUT. Open returns non-zero upon success, the undefined value other- wise. If the open involved a pipe, the return value happens to be the pid of the subprocess. Examples: $article = 100; open article || die "Can't find article $article: $!\n"; while (
) {... open(LOG, '>>/usr/spool/news/twitlog'); # (log is reserved) open(article, "caesar <$article |"); # decrypt article open(extract, "|sort >/tmp/Tmp$$"); # $$ is our process# # process argument list of files along with any includes foreach $file (@ARGV) { do process($file, 'fh00'); # no pun intended } sub process { local($filename, $input) = @_; $input++; # this is a string increment unless (open($input, $filename)) { print STDERR "Can't open $filename: $!\n"; return; } while (<$input>) { # note use of indirection if (/^#include "(.*)"/) { do process($1, $input); next; } ... # whatever } } You may also, in the Bourne shell tradition, spec- ify an EXPR beginning with ">&", in which case the rest of the string is interpreted as the name of a filehandle (or file descriptor, if numeric) which is to be duped and opened. You may use & after >, >>, <, +>, +>> and +<. The mode you specify should match the mode of the original filehandle. Here is a script that saves, redirects, and restores STDOUT and STDERR: Release 4.0 Patchlevel 19 50 PERL(1) PERL(1) #!/usr/bin/perl open(SAVEOUT, ">&STDOUT"); open(SAVEERR, ">&STDERR"); open(STDOUT, ">foo.out") || die "Can't redirect stdout"; open(STDERR, ">&STDOUT") || die "Can't dup stdout"; select(STDERR); $| = 1; # make unbuffered select(STDOUT); $| = 1; # make unbuffered print STDOUT "stdout 1\n"; # this works for print STDERR "stderr 1\n"; # subprocesses too close(STDOUT); close(STDERR); open(STDOUT, ">&SAVEOUT"); open(STDERR, ">&SAVEERR"); print STDOUT "stdout 2\n"; print STDERR "stderr 2\n"; If you open a pipe on the command "-", i.e. either "|-" or "-|", then there is an implicit fork done, and the return value of open is the pid of the child within the parent process, and 0 within the child process. (Use defined($pid) to determine if the open was successful.) The filehandle behaves normally for the parent, but i/o to that filehan- dle is piped from/to the STDOUT/STDIN of the child process. In the child process the filehandle isn't opened--i/o happens from/to the new STDOUT or STDIN. Typically this is used like the normal piped open when you want to exercise more control over just how the pipe command gets executed, such as when you are running setuid, and don't want to have to scan shell commands for metacharacters. The following pairs are more or less equivalent: open(FOO, "|tr '[a-z]' '[A-Z]'"); open(FOO, "|-") || exec 'tr', '[a-z]', '[A-Z]'; open(FOO, "cat -n '$file'|"); open(FOO, "-|") || exec 'cat', '-n', $file; Explicitly closing any piped filehandle causes the parent process to wait for the child to finish, and returns the status value in $?. Note: on any operation which may do a fork, unflushed buffers remain unflushed in both processes, which means you may need to set $| to avoid duplicate output. The filename that is passed to open will have leading and trailing whitespace deleted. In order Release 4.0 Patchlevel 19 51 PERL(1) PERL(1) to open a file with arbitrary weird characters in it, it's necessary to protect any leading and trailing whitespace thusly: $file =~ s#^(\s)#./$1#; open(FOO, "< $file\0"); opendir(DIRHANDLE,EXPR) Opens a directory named EXPR for processing by readdir(), telldir(), seekdir(), rewinddir() and closedir(). Returns true if successful. DIRHAN- DLEs have their own namespace separate from FILE- HANDLEs. ord(EXPR) ord EXPR Returns the numeric ascii value of the first char- acter of EXPR. If EXPR is omitted, uses $_. pack(TEMPLATE,LIST) Takes an array or list of values and packs it into a binary structure, returning the string contain- ing the structure. The TEMPLATE is a sequence of characters that give the order and type of values, as follows: A An ascii string, will be space padded. a An ascii string, will be null padded. c A signed char value. C An unsigned char value. s A signed short value. S An unsigned short value. i A signed integer value. I An unsigned integer value. l A signed long value. L An unsigned long value. n A short in "network" order. N A long in "network" order. f A single-precision float in the native format. d A double-precision float in the native format. p A pointer to a string. v A short in "VAX" (little-endian) order. V A long in "VAX" (little-endian) order. x A null byte. X Back up a byte. @ Null fill to absolute position. u A uuencoded string. b A bit string (ascending bit order, like vec()). B A bit string (descending bit order). h A hex string (low nybble first). H A hex string (high nybble first). Release 4.0 Patchlevel 19 52 PERL(1) PERL(1) Each letter may optionally be followed by a number which gives a repeat count. With all types except "a", "A", "b", "B", "h" and "H", the pack function will gobble up that many values from the LIST. A * for the repeat count means to use however many items are left. The "a" and "A" types gobble just one value, but pack it as a string of length count, padding with nulls or spaces as necessary. (When unpacking, "A" strips trailing spaces and nulls, but "a" does not.) Likewise, the "b" and "B" fields pack a string that many bits long. The "h" and "H" fields pack a string that many nybbles long. Real numbers (floats and doubles) are in the native machine format only; due to the multi- plicity of floating formats around, and the lack of a standard "network" representation, no facil- ity for interchange has been made. This means that packed floating point data written on one machine may not be readable on another - even if both use IEEE floating point arithmetic (as the endian-ness of the memory representation is not part of the IEEE spec). Note that perl uses dou- bles internally for all numeric calculation, and converting from double -> float -> double will lose precision (i.e. unpack("f", pack("f", $foo)) will not in general equal $foo). Examples: $foo = pack("cccc",65,66,67,68); # foo eq "ABCD" $foo = pack("c4",65,66,67,68); # same thing $foo = pack("ccxxcc",65,66,67,68); # foo eq "AB\0\0CD" $foo = pack("s2",1,2); # "\1\0\2\0" on little-endian # "\0\1\0\2" on big-endian $foo = pack("a4","abcd","x","y","z"); # "abcd" $foo = pack("aaaa","abcd","x","y","z"); # "axyz" $foo = pack("a14","abcdefg"); # "abcdefg\0\0\0\0\0\0\0" $foo = pack("i9pl", gmtime); # a real struct tm (on my system anyway) sub bintodec { unpack("N", pack("B32", substr("0" x 32 . shift, -32))); Release 4.0 Patchlevel 19 53 PERL(1) PERL(1) } The same template may generally also be used in the unpack function. pipe(READHANDLE,WRITEHANDLE) Opens a pair of connected pipes like the corre- sponding system call. Note that if you set up a loop of piped processes, deadlock can occur unless you are very careful. In addition, note that perl's pipes use stdio buffering, so you may need to set $| to flush your WRITEHANDLE after each command, depending on the application. [Requires version 3.0 patchlevel 9.] pop(ARRAY) pop ARRAY Pops and returns the last value of the array, shortening the array by 1. Has the same effect as $tmp = $ARRAY[$#ARRAY--]; If there are no elements in the array, returns the undefined value. print(FILEHANDLE LIST) print(LIST) print FILEHANDLE LIST print LIST print Prints a string or a comma-separated list of strings. Returns non-zero if successful. FILE- HANDLE may be a scalar variable name, in which case the variable contains the name of the file- handle, thus introducing one level of indirection. (NOTE: If FILEHANDLE is a variable and the next token is a term, it may be misinterpreted as an operator unless you interpose a + or put parens around the arguments.) If FILEHANDLE is omitted, prints by default to standard output (or to the last selected output channel--see select()). If LIST is also omitted, prints $_ to STDOUT. To set the default output channel to something other than STDOUT use the select operation. Note that, because print takes a LIST, anything in the LIST is evaluated in an array context, and any subrou- tine that you call will have one or more of its expressions evaluated in an array context. Also be careful not to follow the print keyword with a left parenthesis unless you want the corresponding right parenthesis to terminate the arguments to Release 4.0 Patchlevel 19 54 PERL(1) PERL(1) the print--interpose a + or put parens around all the arguments. printf(FILEHANDLE LIST) printf(LIST) printf FILEHANDLE LIST printf LIST Equivalent to a "print FILEHANDLE sprintf(LIST)". push(ARRAY,LIST) Treats ARRAY (@ is optional) as a stack, and pushes the values of LIST onto the end of ARRAY. The length of ARRAY increases by the length of LIST. Has the same effect as for $value (LIST) { $ARRAY[++$#ARRAY] = $value; } but is more efficient. q/STRING/ qq/STRING/ qx/STRING/ These are not really functions, but simply syntac- tic sugar to let you avoid putting too many back- slashes into quoted strings. The q operator is a generalized single quote, and the qq operator a generalized double quote. The qx operator is a generalized backquote. Any non-alphanumeric delimiter can be used in place of /, including newline. If the delimiter is an opening bracket or parenthesis, the final delimiter will be the corresponding closing bracket or parenthesis. (Embedded occurrences of the closing bracket need to be backslashed as usual.) Examples: $foo = q!I said, "You said, 'She said it.'"!; $bar = q('This is it.'); $today = qx{ date }; $_ .= qq *** The previous line contains the naughty word "$&".\n if /(ibm|apple|awk)/; # :-) Release 4.0 Patchlevel 19 55 PERL(1) PERL(1) rand(EXPR) rand EXPR rand Returns a random fractional number between 0 and the value of EXPR. (EXPR should be positive.) If EXPR is omitted, returns a value between 0 and 1. See also srand(). read(FILEHANDLE,SCALAR,LENGTH,OFFSET) read(FILEHANDLE,SCALAR,LENGTH) Attempts to read LENGTH bytes of data into vari- able SCALAR from the specified FILEHANDLE. Returns the number of bytes actually read, or undef if there was an error. SCALAR will be grown or shrunk to the length actually read. An OFFSET may be specified to place the read data at some other place than the beginning of the string. This call is actually implemented in terms of stdio's fread call. To get a true read system call, see sysread. readdir(DIRHANDLE) readdir DIRHANDLE Returns the next directory entry for a directory opened by opendir(). If used in an array context, returns all the rest of the entries in the direc- tory. If there are no more entries, returns an undefined value in a scalar context or a null list in an array context. readlink(EXPR) readlink EXPR Returns the value of a symbolic link, if symbolic links are implemented. If not, gives a fatal error. If there is some system error, returns the undefined value and sets $! (errno). If EXPR is omitted, uses $_. recv(SOCKET,SCALAR,LEN,FLAGS) Receives a message on a socket. Attempts to receive LENGTH bytes of data into variable SCALAR from the specified SOCKET filehandle. Returns the address of the sender, or the undefined value if there's an error. SCALAR will be grown or shrunk to the length actually read. Takes the same flags as the system call of the same name. Release 4.0 Patchlevel 19 56 PERL(1) PERL(1) redo LABEL redo The redo command restarts the loop block without evaluating the conditional again. The continue block, if any, is not executed. If the LABEL is omitted, the command refers to the innermost enclosing loop. This command is normally used by programs that want to lie to themselves about what was just input: # a simpleminded Pascal comment stripper # (warning: assumes no { or } in strings) line: while () { while (s|({.*}.*){.*}|$1 |) {} s|{.*}| |; if (s|{.*| |) { $front = $_; while () { if (/}/) { # end of comment? s|^|$front{|; redo line; } } } print; } rename(OLDNAME,NEWNAME) Changes the name of a file. Returns 1 for suc- cess, 0 otherwise. Will not work across filesys- tem boundaries. require(EXPR) require EXPR require Includes the library file specified by EXPR, or by $_ if EXPR is not supplied. Has semantics similar to the following subroutine: sub require { local($filename) = @_; return 1 if $INC{$filename}; local($realfilename,$result); ITER: { foreach $prefix (@INC) { $realfilename = "$prefix/$filename"; if (-f $realfilename) { $result = do $realfilename; last ITER; } } die "Can't find $filename in \@INC"; Release 4.0 Patchlevel 19 57 PERL(1) PERL(1) } die $@ if $@; die "$filename did not return true value" unless $result; $INC{$filename} = $realfilename; $result; } Note that the file will not be included twice under the same specified name. reset(EXPR) reset EXPR reset Generally used in a continue block at the end of a loop to clear variables and reset ?? searches so that they work again. The expression is inter- preted as a list of single characters (hyphens allowed for ranges). All variables and arrays beginning with one of those letters are reset to their pristine state. If the expression is omit- ted, one-match searches (?pattern?) are reset to match again. Only resets variables or searches in the current package. Always returns 1. Examples: reset 'X'; # reset all X variables reset 'a-z'; # reset lower case variables reset; # just reset ?? searches Note: resetting "A-Z" is not recommended since you'll wipe out your ARGV and ENV arrays. The use of reset on dbm associative arrays does not change the dbm file. (It does, however, flush any entries cached by perl, which may be useful if you are sharing the dbm file. Then again, maybe not.) return LIST Returns from a subroutine with the value speci- fied. (Note that a subroutine can automatically return the value of the last expression evaluated. That's the preferred method--use of an explicit return is a bit slower.) reverse(LIST) reverse LIST In an array context, returns an array value con- sisting of the elements of LIST in the opposite order. In a scalar context, returns a string value consisting of the bytes of the first element of LIST in the opposite order. Release 4.0 Patchlevel 19 58 PERL(1) PERL(1) rewinddir(DIRHANDLE) rewinddir DIRHANDLE Sets the current position to the beginning of the directory for the readdir() routine on DIRHANDLE. rindex(STR,SUBSTR,POSITION) rindex(STR,SUBSTR) Works just like index except that it returns the position of the LAST occurrence of SUBSTR in STR. If POSITION is specified, returns the last occur- rence at or before that position. rmdir(FILENAME) rmdir FILENAME Deletes the directory specified by FILENAME if it is empty. If it succeeds it returns 1, otherwise it returns 0 and sets $! (errno). If FILENAME is omitted, uses $_. s/PATTERN/REPLACEMENT/gieo Searches a string for a pattern, and if found, replaces that pattern with the replacement text and returns the number of substitutions made. Otherwise it returns false (0). The "g" is optional, and if present, indicates that all occurrences of the pattern are to be replaced. The "i" is also optional, and if present, indi- cates that matching is to be done in a case-insen- sitive manner. The "e" is likewise optional, and if present, indicates that the replacement string is to be evaluated as an expression rather than just as a double-quoted string. Any non-alphanu- meric delimiter may replace the slashes; if single quotes are used, no interpretation is done on the replacement string (the e modifier overrides this, however); if backquotes are used, the replacement string is a command to execute whose output will be used as the actual replacement text. If no string is specified via the =~ or !~ operator, the $_ string is searched and modified. (The string specified with =~ must be a scalar variable, an array element, or an assignment to one of those, i.e. an lvalue.) If the pattern contains a $ that looks like a variable rather than an end-of-string test, the variable will be interpolated into the pattern at run-time. If you only want the pattern compiled once the first time the variable is interpolated, add an "o" at the end. If the PAT- TERN evaluates to a null string, the most recent successful regular expression is used instead. See also the section on regular expressions. Release 4.0 Patchlevel 19 59 PERL(1) PERL(1) Examples: s/\bgreen\b/mauve/g; # don't change wintergreen $path =~ s|/usr/bin|/usr/local/bin|; s/Login: $foo/Login: $bar/; # run-time pattern ($foo = $bar) =~ s/bar/foo/; $_ = 'abc123xyz'; s/\d+/$&*2/e; # yields 'abc246xyz' s/\d+/sprintf("%5d",$&)/e; # yields 'abc 246xyz' s/\w/$& x 2/eg; # yields 'aabbcc 224466xxyyzz' s/([^ ]*) *([^ ]*)/$2 $1/; # reverse 1st two fields (Note the use of $ instead of \ in the last exam- ple. See section on regular expressions.) scalar(EXPR) Forces EXPR to be interpreted in a scalar context and returns the value of EXPR. seek(FILEHANDLE,POSITION,WHENCE) Randomly positions the file pointer for FILEHAN- DLE, just like the fseek() call of stdio. FILE- HANDLE may be an expression whose value gives the name of the filehandle. Returns 1 upon success, 0 otherwise. seekdir(DIRHANDLE,POS) Sets the current position for the readdir() rou- tine on DIRHANDLE. POS must be a value returned by telldir(). Has the same caveats about possible directory compaction as the corresponding system library routine. select(FILEHANDLE) select Returns the currently selected filehandle. Sets the current default filehandle for output, if FILEHANDLE is supplied. This has two effects: first, a write or a print without a filehandle will default to this FILEHANDLE. Second, refer- ences to variables related to output will refer to this output channel. For example, if you have to set the top of form format for more than one out- put channel, you might do the following: select(REPORT1); $^ = 'report1_top'; select(REPORT2); $^ = 'report2_top'; Release 4.0 Patchlevel 19 60 PERL(1) PERL(1) FILEHANDLE may be an expression whose value gives the name of the actual filehandle. Thus: $oldfh = select(STDERR); $| = 1; select($oldfh); select(RBITS,WBITS,EBITS,TIMEOUT) This calls the select system call with the bit- masks specified, which can be constructed using fileno() and vec(), along these lines: $rin = $win = $ein = ''; vec($rin,fileno(STDIN),1) = 1; vec($win,fileno(STDOUT),1) = 1; $ein = $rin | $win; If you want to select on many filehandles you might wish to write a subroutine: sub fhbits { local(@fhlist) = split(' ',$_[0]); local($bits); for (@fhlist) { vec($bits,fileno($_),1) = 1; } $bits; } $rin = &fhbits('STDIN TTY SOCK'); The usual idiom is: ($nfound,$timeleft) = select($rout=$rin, $wout=$win, $eout=$ein, $timeout); or to block until something becomes ready: $nfound = select($rout=$rin, $wout=$win, $eout=$ein, undef); Any of the bitmasks can also be undef. The time- out, if specified, is in seconds, which may be fractional. NOTE: not all implementations are capable of returning the $timeleft. If not, they always return $timeleft equal to the supplied $timeout. semctl(ID,SEMNUM,CMD,ARG) Calls the System V IPC function semctl. If CMD is &IPC_STAT or &GETALL, then ARG must be a variable which will hold the returned semid_ds structure or semaphore value array. Returns like ioctl: the undefined value for error, "0 but true" for zero, or the actual return value otherwise. Release 4.0 Patchlevel 19 61 PERL(1) PERL(1) semget(KEY,NSEMS,SIZE,FLAGS) Calls the System V IPC function semget. Returns the semaphore id, or the undefined value if there is an error. semop(KEY,OPSTRING) Calls the System V IPC function semop to perform semaphore operations such as signaling and wait- ing. OPSTRING must be a packed array of semop structures. Each semop structure can be generated with 'pack("sss", $semnum, $semop, $semflag)'. The number of semaphore operations is implied by the length of OPSTRING. Returns true if success- ful, or false if there is an error. As an exam- ple, the following code waits on semaphore $semnum of semaphore id $semid: $semop = pack("sss", $semnum, -1, 0); die "Semaphore trouble: $!\n" unless semop($semid, $semop); To signal the semaphore, replace "-1" with "1". send(SOCKET,MSG,FLAGS,TO) send(SOCKET,MSG,FLAGS) Sends a message on a socket. Takes the same flags as the system call of the same name. On uncon- nected sockets you must specify a destination to send TO. Returns the number of characters sent, or the undefined value if there is an error. setpgrp(PID,PGRP) Sets the current process group for the specified PID, 0 for the current process. Will produce a fatal error if used on a machine that doesn't implement setpgrp(2). setpriority(WHICH,WHO,PRIORITY) Sets the current priority for a process, a process group, or a user. (See setpriority(2).) Will produce a fatal error if used on a machine that doesn't implement setpriority(2). setsockopt(SOCKET,LEVEL,OPTNAME,OPTVAL) Sets the socket option requested. Returns unde- fined if there is an error. OPTVAL may be speci- fied as undef if you don't want to pass an argu- ment. shift(ARRAY) shift ARRAY Release 4.0 Patchlevel 19 62 PERL(1) PERL(1) shift Shifts the first value of the array off and returns it, shortening the array by 1 and moving everything down. If there are no elements in the array, returns the undefined value. If ARRAY is omitted, shifts the @ARGV array in the main pro- gram, and the @_ array in subroutines. (This is determined lexically.) See also unshift(), push() and pop(). Shift() and unshift() do the same thing to the left end of an array that push() and pop() do to the right end. shmctl(ID,CMD,ARG) Calls the System V IPC function shmctl. If CMD is &IPC_STAT, then ARG must be a variable which will hold the returned shmid_ds structure. Returns like ioctl: the undefined value for error, "0 but true" for zero, or the actual return value other- wise. shmget(KEY,SIZE,FLAGS) Calls the System V IPC function shmget. Returns the shared memory segment id, or the undefined value if there is an error. shmread(ID,VAR,POS,SIZE) shmwrite(ID,STRING,POS,SIZE) Reads or writes the System V shared memory segment ID starting at position POS for size SIZE by attaching to it, copying in/out, and detaching from it. When reading, VAR must be a variable which will hold the data read. When writing, if STRING is too long, only SIZE bytes are used; if STRING is too short, nulls are written to fill out SIZE bytes. Return true if successful, or false if there is an error. shutdown(SOCKET,HOW) Shuts down a socket connection in the manner indi- cated by HOW, which has the same interpretation as in the system call of the same name. sin(EXPR) sin EXPR Returns the sine of EXPR (expressed in radians). If EXPR is omitted, returns sine of $_. sleep(EXPR) sleep EXPR sleep Causes the script to sleep for EXPR seconds, or forever if no EXPR. May be interrupted by sending Release 4.0 Patchlevel 19 63 PERL(1) PERL(1) the process a SIGALRM. Returns the number of sec- onds actually slept. You probably cannot mix alarm() and sleep() calls, since sleep() is often implemented using alarm(). socket(SOCKET,DOMAIN,TYPE,PROTOCOL) Opens a socket of the specified kind and attaches it to filehandle SOCKET. DOMAIN, TYPE and PROTO- COL are specified the same as for the system call of the same name. You may need to run h2ph on sys/socket.h to get the proper values handy in a perl library file. Return true if successful. See the example in the section on Interprocess Communication. socketpair(SOCKET1,SOCKET2,DOMAIN,TYPE,PROTOCOL) Creates an unnamed pair of sockets in the speci- fied domain, of the specified type. DOMAIN, TYPE and PROTOCOL are specified the same as for the system call of the same name. If unimplemented, yields a fatal error. Return true if successful. sort(SUBROUTINE LIST) sort(LIST) sort SUBROUTINE LIST sort BLOCK LIST sort LIST Sorts the LIST and returns the sorted array value. Nonexistent values of arrays are stripped out. If SUBROUTINE or BLOCK is omitted, sorts in standard string comparison order. If SUBROUTINE is speci- fied, gives the name of a subroutine that returns an integer less than, equal to, or greater than 0, depending on how the elements of the array are to be ordered. (The <=> and cmp operators are extremely useful in such routines.) SUBROUTINE may be a scalar variable name, in which case the value provides the name of the subroutine to use. In place of a SUBROUTINE name, you can provide a BLOCK as an anonymous, in-line sort subroutine. In the interests of efficiency the normal calling code for subroutines is bypassed, with the follow- ing effects: the subroutine may not be a recursive subroutine, and the two elements to be compared are passed into the subroutine not via @_ but as $a and $b (see example below). They are passed by reference so don't modify $a and $b. Examples: Release 4.0 Patchlevel 19 64 PERL(1) PERL(1) # sort lexically @articles = sort @files; # same thing, but with explicit sort routine @articles = sort {$a cmp $b;} @files; # same thing in reversed order @articles = sort {$b cmp $a;} @files; # sort numerically ascending @articles = sort {$a <=> $b;} @files; # sort numerically descending @articles = sort {$b <=> $a;} @files; # sort using explicit subroutine name sub byage { $age{$a} <=> $age{$b}; # presuming integers } @sortedclass = sort byage @class; sub reverse { $b cmp $a; } @harry = ('dog','cat','x','Cain','Abel'); @george = ('gone','chased','yz','Punished','Axed'); print sort @harry; # prints AbelCaincatdogx print sort reverse @harry; # prints xdogcatCainAbel print sort @george, 'to', @harry; # prints AbelAxedCainPunishedcatchaseddoggonetoxyz splice(ARRAY,OFFSET,LENGTH,LIST) splice(ARRAY,OFFSET,LENGTH) splice(ARRAY,OFFSET) Removes the elements designated by OFFSET and LENGTH from an array, and replaces them with the elements of LIST, if any. Returns the elements removed from the array. The array grows or shrinks as necessary. If LENGTH is omitted, removes everything from OFFSET onward. The fol- lowing equivalencies hold (assuming $[ == 0): push(@a,$x,$y) splice(@a,$#a+1,0,$x,$y) pop(@a) splice(@a,-1) shift(@a) splice(@a,0,1) unshift(@a,$x,$y) splice(@a,0,0,$x,$y) $a[$x] = $y splice(@a,$x,1,$y); Example, assuming array lengths are passed before arrays: sub aeq { # compare two array values Release 4.0 Patchlevel 19 65 PERL(1) PERL(1) local(@a) = splice(@_,0,shift); local(@b) = splice(@_,0,shift); return 0 unless @a == @b; # same len? while (@a) { return 0 if pop(@a) ne pop(@b); } return 1; } if (&aeq($len,@foo[1..$len],0+@bar,@bar)) { ... } split(/PATTERN/,EXPR,LIMIT) split(/PATTERN/,EXPR) split(/PATTERN/) split Splits a string into an array of strings, and returns it. (If not in an array context, returns the number of fields found and splits into the @_ array. (In an array context, you can force the split into @_ by using ?? as the pattern delim- iters, but it still returns the array value.)) If EXPR is omitted, splits the $_ string. If PATTERN is also omitted, splits on whitespace (/[ \t\n]+/). Anything matching PATTERN is taken to be a delimiter separating the fields. (Note that the delimiter may be longer than one charac- ter.) If LIMIT is specified, splits into no more than that many fields (though it may split into fewer). If LIMIT is unspecified, trailing null fields are stripped (which potential users of pop() would do well to remember). A pattern matching the null string (not to be confused with a null pattern //, which is just one member of the set of patterns matching a null string) will split the value of EXPR into separate characters at each point it matches that way. For example: print join(':', split(/ */, 'hi there')); produces the output 'h:i:t:h:e:r:e'. The LIMIT parameter can be used to partially split a line ($login, $passwd, $remainder) = split(/:/, $_, 3); (When assigning to a list, if LIMIT is omitted, perl supplies a LIMIT one larger than the number of variables in the list, to avoid unnecessary work. For the list above LIMIT would have been 4 by default. In time critical applications it behooves you not to split into more fields than Release 4.0 Patchlevel 19 66 PERL(1) PERL(1) you really need.) If the PATTERN contains parentheses, additional array elements are created from each matching sub- string in the delimiter. split(/([,-])/,"1-10,20"); produces the array value (1,'-',10,',',20) The pattern /PATTERN/ may be replaced with an expression to specify patterns that vary at run- time. (To do runtime compilation only once, use /$variable/o.) As a special case, specifying a space (' ') will split on white space just as split with no arguments does, but leading white space does NOT produce a null first field. Thus, split(' ') can be used to emulate awk's default behavior, whereas split(/ /) will give you as many null initial fields as there are leading spaces. Example: open(passwd, '/etc/passwd'); while () { ($login, $passwd, $uid, $gid, $gcos, $home, $shell) = split(/:/); ... } (Note that $shell above will still have a newline on it. See chop().) See also join. sprintf(FORMAT,LIST) Returns a string formatted by the usual printf conventions. The * character is not supported. sqrt(EXPR) sqrt EXPR Return the square root of EXPR. If EXPR is omit- ted, returns square root of $_. srand(EXPR) srand EXPR Sets the random number seed for the rand operator. If EXPR is omitted, does srand(time). Release 4.0 Patchlevel 19 67 PERL(1) PERL(1) stat(FILEHANDLE) stat FILEHANDLE stat(EXPR) stat SCALARVARIABLE Returns a 13-element array giving the statistics for a file, either the file opened via FILEHANDLE, or named by EXPR. Typically used as follows: ($dev,$ino,$mode,$nlink,$uid,$gid,$rdev,$size, $atime,$mtime,$ctime,$blksize,$blocks) = stat($filename); If stat is passed the special filehandle consist- ing of an underline, no stat is done, but the cur- rent contents of the stat structure from the last stat or filetest are returned. Example: if (-x $file && (($d) = stat(_)) && $d < 0) { print "$file is executable NFS file\n"; } (This only works on machines for which the device number is negative under NFS.) study(SCALAR) study SCALAR study Takes extra time to study SCALAR ($_ if unspeci- fied) in anticipation of doing many pattern matches on the string before it is next modified. This may or may not save time, depending on the nature and number of patterns you are searching on, and on the distribution of character frequen- cies in the string to be searched--you probably want to compare runtimes with and without it to see which runs faster. Those loops which scan for many short constant strings (including the con- stant parts of more complex patterns) will benefit most. You may have only one study active at a time--if you study a different scalar the first is "unstudied". (The way study works is this: a linked list of every character in the string to be searched is made, so we know, for example, where all the 'k' characters are. From each search string, the rarest character is selected, based on some static frequency tables constructed from some C programs and English text. Only those places that contain this "rarest" character are exam- ined.) Release 4.0 Patchlevel 19 68 PERL(1) PERL(1) For example, here is a loop which inserts index producing entries before any line containing a certain pattern: while (<>) { study; print ".IX foo\n" if /\bfoo\b/; print ".IX bar\n" if /\bbar\b/; print ".IX blurfl\n" if /\bblurfl\b/; ... print; } In searching for /\bfoo\b/, only those locations in $_ that contain 'f' will be looked at, because 'f' is rarer than 'o'. In general, this is a big win except in pathological cases. The only ques- tion is whether it saves you more time than it took to build the linked list in the first place. Note that if you have to look for strings that you don't know till runtime, you can build an entire loop as a string and eval that to avoid recompil- ing all your patterns all the time. Together with undefining $/ to input entire files as one record, this can be very fast, often faster than special- ized programs like fgrep. The following scans a list of files (@files) for a list of words (@words), and prints out the names of those files that contain a match: $search = 'while (<>) { study;'; foreach $word (@words) { $search .= "++\$seen{\$ARGV} if /\b$word\b/;\n"; } $search .= "}"; @ARGV = @files; undef $/; eval $search; # this screams $/ = "\n"; # put back to normal input delim foreach $file (sort keys(%seen)) { print $file, "\n"; } substr(EXPR,OFFSET,LEN) substr(EXPR,OFFSET) Extracts a substring out of EXPR and returns it. First character is at offset 0, or whatever you've set $[ to. If OFFSET is negative, starts that far from the end of the string. If LEN is omitted, returns everything to the end of the string. You can use the substr() function as an lvalue, in Release 4.0 Patchlevel 19 69 PERL(1) PERL(1) which case EXPR must be an lvalue. If you assign something shorter than LEN, the string will shrink, and if you assign something longer than LEN, the string will grow to accommodate it. To keep the string the same length you may need to pad or chop your value using sprintf(). symlink(OLDFILE,NEWFILE) Creates a new filename symbolically linked to the old filename. Returns 1 for success, 0 otherwise. On systems that don't support symbolic links, pro- duces a fatal error at run time. To check for that, use eval: $symlink_exists = (eval 'symlink("","");', $@ eq ''); syscall(LIST) syscall LIST Calls the system call specified as the first ele- ment of the list, passing the remaining elements as arguments to the system call. If unimple- mented, produces a fatal error. The arguments are interpreted as follows: if a given argument is numeric, the argument is passed as an int. If not, the pointer to the string value is passed. You are responsible to make sure a string is pre- extended long enough to receive any result that might be written into a string. If your integer arguments are not literals and have never been interpreted in a numeric context, you may need to add 0 to them to force them to look like numbers. require 'syscall.ph'; # may need to run h2ph syscall(&SYS_write, fileno(STDOUT), "hi there\n", 9); sysread(FILEHANDLE,SCALAR,LENGTH,OFFSET) sysread(FILEHANDLE,SCALAR,LENGTH) Attempts to read LENGTH bytes of data into vari- able SCALAR from the specified FILEHANDLE, using the system call read(2). It bypasses stdio, so mixing this with other kinds of reads may cause confusion. Returns the number of bytes actually read, or undef if there was an error. SCALAR will be grown or shrunk to the length actually read. An OFFSET may be specified to place the read data at some other place than the beginning of the string. Release 4.0 Patchlevel 19 70 PERL(1) PERL(1) system(LIST) system LIST Does exactly the same thing as "exec LIST" except that a fork is done first, and the parent process waits for the child process to complete. Note that argument processing varies depending on the number of arguments. The return value is the exit status of the program as returned by the wait() call. To get the actual exit value divide by 256. See also exec. syswrite(FILEHANDLE,SCALAR,LENGTH,OFFSET) syswrite(FILEHANDLE,SCALAR,LENGTH) Attempts to write LENGTH bytes of data from vari- able SCALAR to the specified FILEHANDLE, using the system call write(2). It bypasses stdio, so mix- ing this with prints may cause confusion. Returns the number of bytes actually written, or undef if there was an error. An OFFSET may be specified to place the read data at some other place than the beginning of the string. tell(FILEHANDLE) tell FILEHANDLE tell Returns the current file position for FILEHANDLE. FILEHANDLE may be an expression whose value gives the name of the actual filehandle. If FILEHANDLE is omitted, assumes the file last read. telldir(DIRHANDLE) telldir DIRHANDLE Returns the current position of the readdir() rou- tines on DIRHANDLE. Value may be given to seekdir() to access a particular location in a directory. Has the same caveats about possible directory compaction as the corresponding system library routine. time Returns the number of non-leap seconds since 00:00:00 UTC, January 1, 1970. Suitable for feed- ing to gmtime() and localtime(). times Returns a four-element array giving the user and system times, in seconds, for this process and the children of this process. ($user,$system,$cuser,$csystem) = times; Release 4.0 Patchlevel 19 71 PERL(1) PERL(1) tr/SEARCHLIST/REPLACEMENTLIST/cds y/SEARCHLIST/REPLACEMENTLIST/cds Translates all occurrences of the characters found in the search list with the corresponding charac- ter in the replacement list. It returns the num- ber of characters replaced or deleted. If no string is specified via the =~ or !~ operator, the $_ string is translated. (The string specified with =~ must be a scalar variable, an array ele- ment, or an assignment to one of those, i.e. an lvalue.) For sed devotees, y is provided as a synonym for tr. If the c modifier is specified, the SEARCHLIST character set is complemented. If the d modifier is specified, any characters specified by SEARCH- LIST that are not found in REPLACEMENTLIST are deleted. (Note that this is slightly more flexi- ble than the behavior of some tr programs, which delete anything they find in the SEARCHLIST, period.) If the s modifier is specified, sequences of characters that were translated to the same character are squashed down to 1 instance of the character. If the d modifier was used, the REPLACEMENTLIST is always interpreted exactly as specified. Other- wise, if the REPLACEMENTLIST is shorter than the SEARCHLIST, the final character is replicated till it is long enough. If the REPLACEMENTLIST is null, the SEARCHLIST is replicated. This latter is useful for counting characters in a class, or for squashing character sequences in a class. Examples: $ARGV[1] =~ y/A-Z/a-z/; # canonicalize to lower case $cnt = tr/*/*/; # count the stars in $_ $cnt = tr/0-9//; # count the digits in $_ tr/a-zA-Z//s; # bookkeeper -> bokeper ($HOST = $host) =~ tr/a-z/A-Z/; y/a-zA-Z/ /cs; # change non-alphas to single space tr/\200-\377/\0-\177/; # delete 8th bit Release 4.0 Patchlevel 19 72 PERL(1) PERL(1) truncate(FILEHANDLE,LENGTH) truncate(EXPR,LENGTH) Truncates the file opened on FILEHANDLE, or named by EXPR, to the specified length. Produces a fatal error if truncate isn't implemented on your system. umask(EXPR) umask EXPR umask Sets the umask for the process and returns the old one. If EXPR is omitted, merely returns current umask. undef(EXPR) undef EXPR undef Undefines the value of EXPR, which must be an lvalue. Use only on a scalar value, an entire array, or a subroutine name (using &). (Undef will probably not do what you expect on most pre- defined variables or dbm array values.) Always returns the undefined value. You can omit the EXPR, in which case nothing is undefined, but you still get an undefined value that you could, for instance, return from a subroutine. Examples: undef $foo; undef $bar{'blurfl'}; undef @ary; undef %assoc; undef &mysub; return (wantarray ? () : undef) if $they_blew_it; unlink(LIST) unlink LIST Deletes a list of files. Returns the number of files successfully deleted. $cnt = unlink 'a', 'b', 'c'; unlink @goners; unlink <*.bak>; Note: unlink will not delete directories unless you are superuser and the -U flag is supplied to perl. Even if these conditions are met, be warned that unlinking a directory can inflict damage on your filesystem. Use rmdir instead. Release 4.0 Patchlevel 19 73 PERL(1) PERL(1) unpack(TEMPLATE,EXPR) Unpack does the reverse of pack: it takes a string representing a structure and expands it out into an array value, returning the array value. (In a scalar context, it merely returns the first value produced.) The TEMPLATE has the same format as in the pack function. Here's a subroutine that does substring: sub substr { local($what,$where,$howmuch) = @_; unpack("x$where a$howmuch", $what); } and then there's sub ord { unpack("c",$_[0]); } In addition, you may prefix a field with a % to indicate that you want a -bit checksum of the items instead of the items them- selves. Default is a 16-bit checksum. For exam- ple, the following computes the same number as the System V sum program: while (<>) { $checksum += unpack("%16C*", $_); } $checksum %= 65536; unshift(ARRAY,LIST) Does the opposite of a shift. Or the opposite of a push, depending on how you look at it. Prepends list to the front of the array, and returns the number of elements in the new array. unshift(ARGV, '-e') unless $ARGV[0] =~ /^-/; utime(LIST) utime LIST Changes the access and modification times on each file of a list of files. The first two elements of the list must be the NUMERICAL access and modi- fication times, in that order. Returns the number of files successfully changed. The inode modifi- cation time of each file is set to the current time. Example of a "touch" command: #!/usr/bin/perl $now = time; utime $now, $now, @ARGV; Release 4.0 Patchlevel 19 74 PERL(1) PERL(1) values(ASSOC_ARRAY) values ASSOC_ARRAY Returns a normal array consisting of all the val- ues of the named associative array. The values are returned in an apparently random order, but it is the same order as either the keys() or each() function would produce on the same array. See also keys() and each(). vec(EXPR,OFFSET,BITS) Treats a string as a vector of unsigned integers, and returns the value of the bitfield specified. May also be assigned to. BITS must be a power of two from 1 to 32. Vectors created with vec() can also be manipulated with the logical operators |, & and ^, which will assume a bit vector operation is desired when both operands are strings. This interpretation is not enabled unless there is at least one vec() in your program, to protect older programs. To transform a bit vector into a string or array of 0's and 1's, use these: $bits = unpack("b*", $vector); @bits = split(//, unpack("b*", $vector)); If you know the exact length in bits, it can be used in place of the *. wait Waits for a child process to terminate and returns the pid of the deceased process, or -1 if there are no child processes. The status is returned in $?. waitpid(PID,FLAGS) Waits for a particular child process to terminate and returns the pid of the deceased process, or -1 if there is no such child process. The status is returned in $?. If you say require "sys/wait.h"; ... waitpid(-1,&WNOHANG); then you can do a non-blocking wait for any pro- cess. Non-blocking wait is only available on machines supporting either the waitpid (2) or wait4 (2) system calls. However, waiting for a particular pid with FLAGS of 0 is implemented everywhere. (Perl emulates the system call by remembering the status values of processes that Release 4.0 Patchlevel 19 75 PERL(1) PERL(1) have exited but have not been harvested by the Perl script yet.) wantarray Returns true if the context of the currently exe- cuting subroutine is looking for an array value. Returns false if the context is looking for a scalar. return wantarray ? () : undef; warn(LIST) warn LIST Produces a message on STDERR just like "die", but doesn't exit. write(FILEHANDLE) write(EXPR) write Writes a formatted record (possibly multi-line) to the specified file, using the format associated with that file. By default the format for a file is the one having the same name is the filehandle, but the format for the current output channel (see select) may be set explicitly by assigning the name of the format to the $~ variable. Top of form processing is handled automatically: if there is insufficient room on the current page for the formatted record, the page is advanced by writing a form feed, a special top-of-page format is used to format the new page header, and then the record is written. By default the top-of-page format is the name of the filehandle with "_TOP" appended, but it may be dynamicallly set to the format of your choice by assigning the name to the $^ variable while the filehandle is selected. The number of lines remaining on the current page is in variable $-, which can be set to 0 to force a new page. If FILEHANDLE is unspecified, output goes to the current default output channel, which starts out as STDOUT but may be changed by the select opera- tor. If the FILEHANDLE is an EXPR, then the expression is evaluated and the resulting string is used to look up the name of the FILEHANDLE at run time. For more on formats, see the section on formats later on. Note that write is NOT the opposite of read. Release 4.0 Patchlevel 19 76 PERL(1) PERL(1) Precedence Perl operators have the following associativity and prece- dence: nonassoc print printf exec system sort reverse chmod chown kill unlink utime die return left , right = += -= *= etc. right ?: nonassoc .. left || left && left | ^ left & nonassoc == != <=> eq ne cmp nonassoc < > <= >= lt gt le ge nonassoc chdir exit eval reset sleep rand umask nonassoc -r -w -x etc. left << >> left + - . left * / % x left =~ !~ right ! ~ and unary minus right ** nonassoc ++ -- left '(' As mentioned earlier, if any list operator (print, etc.) or any unary operator (chdir, etc.) is followed by a left parenthesis as the next token on the same line, the opera- tor and arguments within parentheses are taken to be of highest precedence, just like a normal function call. Examples: chdir $foo || die; # (chdir $foo) || die chdir($foo) || die; # (chdir $foo) || die chdir ($foo) || die; # (chdir $foo) || die chdir +($foo) || die; # (chdir $foo) || die but, because * is higher precedence than ||: chdir $foo * 20; # chdir ($foo * 20) chdir($foo) * 20; # (chdir $foo) * 20 chdir ($foo) * 20; # (chdir $foo) * 20 chdir +($foo) * 20; # chdir ($foo * 20) rand 10 * 20; # rand (10 * 20) rand(10) * 20; # (rand 10) * 20 rand (10) * 20; # (rand 10) * 20 rand +(10) * 20; # rand (10 * 20) In the absence of parentheses, the precedence of list operators such as print, sort or chmod is either very high Release 4.0 Patchlevel 19 77 PERL(1) PERL(1) or very low depending on whether you look at the left side of operator or the right side of it. For example, in @ary = (1, 3, sort 4, 2); print @ary; # prints 1324 the commas on the right of the sort are evaluated before the sort, but the commas on the left are evaluated after. In other words, list operators tend to gobble up all the arguments that follow them, and then act like a simple term with regard to the preceding expression. Note that you have to be careful with parens: # These evaluate exit before doing the print: print($foo, exit); # Obviously not what you want. print $foo, exit; # Nor is this. # These do the print before evaluating exit: (print $foo), exit; # This is what you want. print($foo), exit; # Or this. print ($foo), exit; # Or even this. Also note that print ($foo & 255) + 1, "\n"; probably doesn't do what you expect at first glance. Subroutines A subroutine may be declared as follows: sub NAME BLOCK Any arguments passed to the routine come in as array @_, that is ($_[0], $_[1], ...). The array @_ is a local array, but its values are references to the actual scalar parameters. The return value of the subroutine is the value of the last expression evaluated, and can be either an array value or a scalar value. Alternately, a return statement may be used to specify the returned value and exit the subroutine. To create local variables see the local operator. A subroutine is called using the do operator or the & operator. Release 4.0 Patchlevel 19 78 PERL(1) PERL(1) Example: sub MAX { local($max) = pop(@_); foreach $foo (@_) { $max = $foo if $max < $foo; } $max; } ... $bestday = &MAX($mon,$tue,$wed,$thu,$fri); Example: # get a line, combining continuation lines # that start with whitespace sub get_line { $thisline = $lookahead; line: while ($lookahead = ) { if ($lookahead =~ /^[ \t]/) { $thisline .= $lookahead; } else { last line; } } $thisline; } $lookahead = ; # get first line while ($_ = do get_line()) { ... } Use array assignment to a local list to name your formal arguments: sub maybeset { local($key, $value) = @_; $foo{$key} = $value unless $foo{$key}; } This also has the effect of turning call-by-reference into call-by-value, since the assignment copies the values. Subroutines may be called recursively. If a subroutine is called using the & form, the argument list is optional. If omitted, no @_ array is set up for the subroutine; the @_ array at the time of the call is visible to subroutine instead. do foo(1,2,3); # pass three arguments &foo(1,2,3); # the same Release 4.0 Patchlevel 19 79 PERL(1) PERL(1) do foo(); # pass a null list &foo(); # the same &foo; # pass no arguments--more efficient Passing By Reference Sometimes you don't want to pass the value of an array to a subroutine but rather the name of it, so that the sub- routine can modify the global copy of it rather than work- ing with a local copy. In perl you can refer to all the objects of a particular name by prefixing the name with a star: *foo. When evaluated, it produces a scalar value that represents all the objects of that name, including any filehandle, format or subroutine. When assigned to within a local() operation, it causes the name mentioned to refer to whatever * value was assigned to it. Example: sub doubleary { local(*someary) = @_; foreach $elem (@someary) { $elem *= 2; } } do doubleary(*foo); do doubleary(*bar); Assignment to *name is currently recommended only inside a local(). You can actually assign to *name anywhere, but the previous referent of *name may be stranded forever. This may or may not bother you. Note that scalars are already passed by reference, so you can modify scalar arguments without using this mechanism by referring explicitly to the $_[nnn] in question. You can modify all the elements of an array by passing all the elements as scalars, but you have to use the * mechanism to push, pop or change the size of an array. The * mecha- nism will probably be more efficient in any case. Since a *name value contains unprintable binary data, if it is used as an argument in a print, or as a %s argument in a printf or sprintf, it then has the value '*name', just so it prints out pretty. Even if you don't want to modify an array, this mechanism is useful for passing multiple arrays in a single LIST, since normally the LIST mechanism will merge all the array values so that you can't extract out the individual arrays. Release 4.0 Patchlevel 19 80 PERL(1) PERL(1) Regular Expressions The patterns used in pattern matching are regular expres- sions such as those supplied in the Version 8 regexp rou- tines. (In fact, the routines are derived from Henry Spencer's freely redistributable reimplementation of the V8 routines.) In addition, \w matches an alphanumeric character (including "_") and \W a nonalphanumeric. Word boundaries may be matched by \b, and non-boundaries by \B. A whitespace character is matched by \s, non-whitespace by \S. A numeric character is matched by \d, non-numeric by \D. You may use \w, \s and \d within character classes. Also, \n, \r, \f, \t and \NNN have their normal interpre- tations. Within character classes \b represents backspace rather than a word boundary. Alternatives may be sepa- rated by |. The bracketing construct ( ... ) may also be used, in which case \ matches the digit'th sub- string. (Outside of the pattern, always use $ instead of \ in front of the digit. The scope of $ (and $`, $& and $') extends to the end of the enclosing BLOCK or eval string, or to the next pattern match with subexpres- sions. The \ notation sometimes works outside the current pattern, but should not be relied upon.) You may have as many parentheses as you wish. If you have more than 9 substrings, the variables $10, $11, ... refer to the corresponding substring. Within the pattern, \10, \11, etc. refer back to substrings if there have been at least that many left parens before the backreference. Otherwise (for backward compatibilty) \10 is the same as \010, a backspace, and \11 the same as \011, a tab. And so on. (\1 through \9 are always backreferences.) $+ returns whatever the last bracket match matched. $& returns the entire matched string. ($0 used to return the same thing, but not any more.) $` returns everything before the matched string. $' returns everything after the matched string. Examples: s/^([^ ]*) *([^ ]*)/$2 $1/; # swap first two words if (/Time: (..):(..):(..)/) { $hours = $1; $minutes = $2; $seconds = $3; } By default, the ^ character is only guaranteed to match at the beginning of the string, the $ character only at the end (or before the newline at the end) and perl does cer- tain optimizations with the assumption that the string contains only one line. The behavior of ^ and $ on embed- ded newlines will be inconsistent. You may, however, wish to treat a string as a multi-line buffer, such that the ^ will match after any newline within the string, and $ will Release 4.0 Patchlevel 19 81 PERL(1) PERL(1) match before any newline. At the cost of a little more overhead, you can do this by setting the variable $* to 1. Setting it back to 0 makes perl revert to its old behav- ior. To facilitate multi-line substitutions, the . character never matches a newline (even when $* is 0). In particu- lar, the following leaves a newline on the $_ string: $_ = ; s/.*(some_string).*/$1/; If the newline is unwanted, try one of s/.*(some_string).*\n/$1/; s/.*(some_string)[^\000]*/$1/; s/.*(some_string)(.|\n)*/$1/; chop; s/.*(some_string).*/$1/; /(some_string)/ && ($_ = $1); Any item of a regular expression may be followed with dig- its in curly brackets of the form {n,m}, where n gives the minimum number of times to match the item and m gives the maximum. The form {n} is equivalent to {n,n} and matches exactly n times. The form {n,} matches n or more times. (If a curly bracket occurs in any other context, it is treated as a regular character.) The * modifier is equiv- alent to {0,}, the + modifier to {1,} and the ? modifier to {0,1}. There is no limit to the size of n or m, but large numbers will chew up more memory. You will note that all backslashed metacharacters in perl are alphanumeric, such as \b, \w, \n. Unlike some other regular expression languages, there are no backslashed symbols that aren't alphanumeric. So anything that looks like \\, \(, \), \<, \>, \{, or \} is always interpreted as a literal character, not a metacharacter. This makes it simple to quote a string that you want to use for a pattern but that you are afraid might contain metacharac- ters. Simply quote all the non-alphanumeric characters: $pattern =~ s/(\W)/\\$1/g; Formats Output record formats for use with the write operator may declared as follows: format NAME = FORMLIST . If name is omitted, format "STDOUT" is defined. FORMLIST Release 4.0 Patchlevel 19 82 PERL(1) PERL(1) consists of a sequence of lines, each of which may be of one of three types: 1. A comment. 2. A "picture" line giving the format for one output line. 3. An argument line supplying values to plug into a pic- ture line. Picture lines are printed exactly as they look, except for certain fields that substitute values into the line. Each picture field starts with either @ or ^. The @ field (not to be confused with the array marker @) is the normal case; ^ fields are used to do rudimentary multi-line text block filling. The length of the field is supplied by padding out the field with multiple <, >, or | characters to specify, respectively, left justification, right justi- fication, or centering. As an alternate form of right justification, you may also use # characters (with an optional .) to specify a numeric field. (Use of ^ instead of @ causes the field to be blanked if undefined.) If any of the values supplied for these fields contains a new- line, only the text up to the newline is printed. The special field @* can be used for printing multi-line val- ues. It should appear by itself on a line. The values are specified on the following line, in the same order as the picture fields. The values should be separated by commas. Picture fields that begin with ^ rather than @ are treated specially. The value supplied must be a scalar variable name which contains a text string. Perl puts as much text as it can into the field, and then chops off the front of the string so that the next time the variable is refer- enced, more of the text can be printed. Normally you would use a sequence of fields in a vertical stack to print out a block of text. If you like, you can end the final field with ..., which will appear in the output if the text was too long to appear in its entirety. You can change which characters are legal to break on by changing the variable $: to a list of the desired characters. Since use of ^ fields can produce variable length records if the text to be formatted is short, you can suppress blank lines by putting the tilde (~) character anywhere in the line. (Normally you should put it in the front if possible, for visibility.) The tilde will be translated to a space upon output. If you put a second tilde con- tiguous to the first, the line will be repeated until all the fields on the line are exhausted. (If you use a field of the @ variety, the expression you supply had better not Release 4.0 Patchlevel 19 83 PERL(1) PERL(1) give the same value every time forever!) Examples: # a report on the /etc/passwd file format STDOUT_TOP = Passwd File Name Login Office Uid Gid Home ------------------------------------------------------------------ . format STDOUT = @<<<<<<<<<<<<<<<<<< @||||||| @<<<<<<@>>>> @>>>> @<<<<<<<<<<<<<<<<< $name, $login, $office,$uid,$gid, $home . # a report from a bug report form format STDOUT_TOP = Bug Reports @<<<<<<<<<<<<<<<<<<<<<<< @||| @>>>>>>>>>>>>>>>>>>>>>>> $system, $%, $date ------------------------------------------------------------------ . format STDOUT = Subject: @<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< $subject Index: @<<<<<<<<<<<<<<<<<<<<<<<<<<<< ^<<<<<<<<<<<<<<<<<<<<<<<<<<<< $index, $description Priority: @<<<<<<<<<< Date: @<<<<<<< ^<<<<<<<<<<<<<<<<<<<<<<<<<<<< $priority, $date, $description From: @<<<<<<<<<<<<<<<<<<<<<<<<<<<<< ^<<<<<<<<<<<<<<<<<<<<<<<<<<<< $from, $description Assigned to: @<<<<<<<<<<<<<<<<<<<<<< ^<<<<<<<<<<<<<<<<<<<<<<<<<<<< $programmer, $description ~ ^<<<<<<<<<<<<<<<<<<<<<<<<<<<< $description ~ ^<<<<<<<<<<<<<<<<<<<<<<<<<<<< $description ~ ^<<<<<<<<<<<<<<<<<<<<<<<<<<<< $description ~ ^<<<<<<<<<<<<<<<<<<<<<<<<<<<< $description ~ ^<<<<<<<<<<<<<<<<<<<<<<<... $description . It is possible to intermix prints with writes on the same output channel, but you'll have to handle $- (lines left on the page) yourself. If you are printing lots of fields that are usually blank, you should consider using the reset operator between records. Not only is it more efficient, but it can pre- vent the bug of adding another field and forgetting to zero it. Release 4.0 Patchlevel 19 84 PERL(1) PERL(1) Interprocess Communication The IPC facilities of perl are built on the Berkeley socket mechanism. If you don't have sockets, you can ignore this section. The calls have the same names as the corresponding system calls, but the arguments tend to dif- fer, for two reasons. First, perl file handles work dif- ferently than C file descriptors. Second, perl already knows the length of its strings, so you don't need to pass that information. Here is a sample client (untested): ($them,$port) = @ARGV; $port = 2345 unless $port; $them = 'localhost' unless $them; $SIG{'INT'} = 'dokill'; sub dokill { kill 9,$child if $child; } require 'sys/socket.ph'; $sockaddr = 'S n a4 x8'; chop($hostname = `hostname`); ($name, $aliases, $proto) = getprotobyname('tcp'); ($name, $aliases, $port) = getservbyname($port, 'tcp') unless $port =~ /^\d+$/; ($name, $aliases, $type, $len, $thisaddr) = gethostbyname($hostname); ($name, $aliases, $type, $len, $thataddr) = gethostbyname($them); $this = pack($sockaddr, &AF_INET, 0, $thisaddr); $that = pack($sockaddr, &AF_INET, $port, $thataddr); socket(S, &PF_INET, &SOCK_STREAM, $proto) || die "socket: $!"; bind(S, $this) || die "bind: $!"; connect(S, $that) || die "connect: $!"; select(S); $| = 1; select(stdout); if ($child = fork) { while (<>) { print S; } sleep 3; do dokill(); } else { while () { print; } } And here's a server: Release 4.0 Patchlevel 19 85 PERL(1) PERL(1) ($port) = @ARGV; $port = 2345 unless $port; require 'sys/socket.ph'; $sockaddr = 'S n a4 x8'; ($name, $aliases, $proto) = getprotobyname('tcp'); ($name, $aliases, $port) = getservbyname($port, 'tcp') unless $port =~ /^\d+$/; $this = pack($sockaddr, &AF_INET, $port, "\0\0\0\0"); select(NS); $| = 1; select(stdout); socket(S, &PF_INET, &SOCK_STREAM, $proto) || die "socket: $!"; bind(S, $this) || die "bind: $!"; listen(S, 5) || die "connect: $!"; select(S); $| = 1; select(stdout); for (;;) { print "Listening again\n"; ($addr = accept(NS,S)) || die $!; print "accept ok\n"; ($af,$port,$inetaddr) = unpack($sockaddr,$addr); @inetaddr = unpack('C4',$inetaddr); print "$af $port @inetaddr\n"; while () { print; print NS; } } Predefined Names The following names have special meaning to perl. I could have used alphabetic symbols for some of these, but I didn't want to take the chance that someone would say reset "a-zA-Z" and wipe them all out. You'll just have to suffer along with these silly symbols. Most of them have reasonable mnemonics, or analogues in one of the shells. $_ The default input and pattern-searching space. The following pairs are equivalent: while (<>) {... # only equivalent in while! while ($_ = <>) {... /^Subject:/ $_ =~ /^Subject:/ Release 4.0 Patchlevel 19 86 PERL(1) PERL(1) y/a-z/A-Z/ $_ =~ y/a-z/A-Z/ chop chop($_) (Mnemonic: underline is understood in certain operations.) $. The current input line number of the last filehan- dle that was read. Readonly. Remember that only an explicit close on the filehandle resets the line number. Since <> never does an explicit close, line numbers increase across ARGV files (but see examples under eof). (Mnemonic: many programs use . to mean the current line number.) $/ The input record separator, newline by default. Works like awk's RS variable, including treating blank lines as delimiters if set to the null string. You may set it to a multicharacter string to match a multi-character delimiter. (Mnemonic: / is used to delimit line boundaries when quoting poetry.) $, The output field separator for the print operator. Ordinarily the print operator simply prints out the comma separated fields you specify. In order to get behavior more like awk, set this variable as you would set awk's OFS variable to specify what is printed between fields. (Mnemonic: what is printed when there is a , in your print state- ment.) $"" This is like $, except that it applies to array values interpolated into a double-quoted string (or similar interpreted string). Default is a space. (Mnemonic: obvious, I think.) $\ The output record separator for the print opera- tor. Ordinarily the print operator simply prints out the comma separated fields you specify, with no trailing newline or record separator assumed. In order to get behavior more like awk, set this variable as you would set awk's ORS variable to specify what is printed at the end of the print. (Mnemonic: you set $\ instead of adding \n at the end of the print. Also, it's just like /, but it's what you get "back" from perl.) $# The output format for printed numbers. This vari- able is a half-hearted attempt to emulate awk's OFMT variable. There are times, however, when awk and perl have differing notions of what is in fact Release 4.0 Patchlevel 19 87 PERL(1) PERL(1) numeric. Also, the initial value is %.20g rather than %.6g, so you need to set $# explicitly to get awk's value. (Mnemonic: # is the number sign.) $% The current page number of the currently selected output channel. (Mnemonic: % is page number in nroff.) $= The current page length (printable lines) of the currently selected output channel. Default is 60. (Mnemonic: = has horizontal lines.) $- The number of lines left on the page of the cur- rently selected output channel. (Mnemonic: lines_on_page - lines_printed.) $~ The name of the current report format for the cur- rently selected output channel. Default is name of the filehandle. (Mnemonic: brother to $^.) $^ The name of the current top-of-page format for the currently selected output channel. Default is name of the filehandle with "_TOP" appended. (Mnemonic: points to top of page.) $| If set to nonzero, forces a flush after every write or print on the currently selected output channel. Default is 0. Note that STDOUT will typically be line buffered if output is to the terminal and block buffered otherwise. Setting this variable is useful primarily when you are outputting to a pipe, such as when you are running a perl script under rsh and want to see the output as it's happening. (Mnemonic: when you want your pipes to be piping hot.) $$ The process number of the perl running this script. (Mnemonic: same as shells.) $? The status returned by the last pipe close, back- tick (``) command or system operator. Note that this is the status word returned by the wait() system call, so the exit value of the subprocess is actually ($? >> 8). $? & 255 gives which sig- nal, if any, the process died from, and whether there was a core dump. (Mnemonic: similar to sh and ksh.) $& The string matched by the last pattern match (not counting any matches hidden within a BLOCK or eval enclosed by the current BLOCK). (Mnemonic: like & in some editors.) Release 4.0 Patchlevel 19 88 PERL(1) PERL(1) $` The string preceding whatever was matched by the last pattern match (not counting any matches hid- den within a BLOCK or eval enclosed by the current BLOCK). (Mnemonic: ` often precedes a quoted string.) $' The string following whatever was matched by the last pattern match (not counting any matches hid- den within a BLOCK or eval enclosed by the current BLOCK). (Mnemonic: ' often follows a quoted string.) Example: $_ = 'abcdefghi'; /def/; print "$`:$&:$'\n"; # prints abc:def:ghi $+ The last bracket matched by the last search pat- tern. This is useful if you don't know which of a set of alternative patterns matched. For example: /Version: (.*)|Revision: (.*)/ && ($rev = $+); (Mnemonic: be positive and forward looking.) $* Set to 1 to do multiline matching within a string, 0 to tell perl that it can assume that strings contain a single line, for the purpose of optimiz- ing pattern matches. Pattern matches on strings containing multiple newlines can produce confusing results when $* is 0. Default is 0. (Mnemonic: * matches multiple things.) Note that this variable only influences the interpretation of ^ and $. A literal newline can be searched for even when $* == 0. $0 Contains the name of the file containing the perl script being executed. Assigning to $0 modifies the argument area that the ps(1) program sees. (Mnemonic: same as sh and ksh.) $ Contains the subpattern from the corresponding set of parentheses in the last pattern matched, not counting patterns matched in nested blocks that have been exited already. (Mnemonic: like \digit.) $[ The index of the first element in an array, and of the first character in a substring. Default is 0, but you could set it to 1 to make perl behave more like awk (or Fortran) when subscripting and when evaluating the index() and substr() functions. (Mnemonic: [ begins subscripts.) Release 4.0 Patchlevel 19 89 PERL(1) PERL(1) $] The string printed out when you say "perl -v". It can be used to determine at the beginning of a script whether the perl interpreter executing the script is in the right range of versions. If used in a numeric context, returns the version + patch- level / 1000. Example: # see if getc is available ($version,$patchlevel) = $] =~ /(\d+\.\d+).*\nPatch level: (\d+)/; print STDERR "(No filename completion available.)\n" if $version * 1000 + $patchlevel < 2016; or, used numerically, warn "No checksumming!\n" if $] < 3.019; (Mnemonic: Is this version of perl in the right bracket?) $; The subscript separator for multi-dimensional array emulation. If you refer to an associative array element as $foo{$a,$b,$c} it really means $foo{join($;, $a, $b, $c)} But don't put @foo{$a,$b,$c} # a slice--note the @ which means ($foo{$a},$foo{$b},$foo{$c}) Default is "\034", the same as SUBSEP in awk. Note that if your keys contain binary data there might not be any safe value for $;. (Mnemonic: comma (the syntactic subscript separator) is a semi-semicolon. Yeah, I know, it's pretty lame, but $, is already taken for something more impor- tant.) $! If used in a numeric context, yields the current value of errno, with all the usual caveats. (This means that you shouldn't depend on the value of $! to be anything in particular unless you've gotten a specific error return indicating a system error.) If used in a string context, yields the corresponding system error string. You can assign to $! in order to set errno if, for instance, you want $! to return the string for error n, or you Release 4.0 Patchlevel 19 90 PERL(1) PERL(1) want to set the exit value for the die operator. (Mnemonic: What just went bang?) $@ The perl syntax error message from the last eval command. If null, the last eval parsed and exe- cuted correctly (although the operations you invoked may have failed in the normal fashion). (Mnemonic: Where was the syntax error "at"?) $< The real uid of this process. (Mnemonic: it's the uid you came FROM, if you're running setuid.) $> The effective uid of this process. Example: $< = $>; # set real uid to the effective uid ($<,$>) = ($>,$<); # swap real and effective uid (Mnemonic: it's the uid you went TO, if you're running setuid.) Note: $< and $> can only be swapped on machines supporting setreuid(). $( The real gid of this process. If you are on a machine that supports membership in multiple groups simultaneously, gives a space separated list of groups you are in. The first number is the one returned by getgid(), and the subsequent ones by getgroups(), one of which may be the same as the first number. (Mnemonic: parentheses are used to GROUP things. The real gid is the group you LEFT, if you're running setgid.) $) The effective gid of this process. If you are on a machine that supports membership in multiple groups simultaneously, gives a space separated list of groups you are in. The first number is the one returned by getegid(), and the subsequent ones by getgroups(), one of which may be the same as the first number. (Mnemonic: parentheses are used to GROUP things. The effective gid is the group that's RIGHT for you, if you're running set- gid.) Note: $<, $>, $( and $) can only be set on machines that support the corresponding set[re][ug]id() routine. $( and $) can only be swapped on machines supporting setregid(). $: The current set of characters after which a string may be broken to fill continuation fields (start- ing with ^) in a format. Default is " \n-", to break on whitespace or hyphens. (Mnemonic: a "colon" in poetry is a part of a line.) $^D The current value of the debugging flags. Release 4.0 Patchlevel 19 91 PERL(1) PERL(1) (Mnemonic: value of -D switch.) $^F The maximum system file descriptor, ordinarily 2. System file descriptors are passed to subpro- cesses, while higher file descriptors are not. During an open, system file descriptors are pre- served even if the open fails. Ordinary file descriptors are closed before the open is attempted. $^I The current value of the inplace-edit extension. Use undef to disable inplace editing. (Mnemonic: value of -i switch.) $^P The internal flag that the debugger clears so that it doesn't debug itself. You could conceivable disable debugging yourself by clearing it. $^T The time at which the script began running, in seconds since the epoch. The values returned by the -M , -A and -C filetests are based on this value. $^W The current value of the warning switch. (Mnemonic: related to the -w switch.) $^X The name that Perl itself was executed as, from argv[0]. $ARGV contains the name of the current file when reading from <>. @ARGV The array ARGV contains the command line arguments intended for the script. Note that $#ARGV is the generally number of arguments minus one, since $ARGV[0] is the first argument, NOT the command name. See $0 for the command name. @INC The array INC contains the list of places to look for perl scripts to be evaluated by the "do EXPR" command or the "require" command. It initially consists of the arguments to any -I command line switches, followed by the default perl library, probably "/usr/local/lib/perl", followed by ".", to represent the current directory. %INC The associative array INC contains entries for each filename that has been included via "do" or "require". The key is the filename you specified, and the value is the location of the file actually found. The "require" command uses this array to determine whether a given file has already been included. Release 4.0 Patchlevel 19 92 PERL(1) PERL(1) $ENV{expr} The associative array ENV contains your current environment. Setting a value in ENV changes the environment for child processes. $SIG{expr} The associative array SIG is used to set signal handlers for various signals. Example: sub handler { # 1st argument is signal name local($sig) = @_; print "Caught a SIG$sig--shutting down\n"; close(LOG); exit(0); } $SIG{'INT'} = 'handler'; $SIG{'QUIT'} = 'handler'; ... $SIG{'INT'} = 'DEFAULT'; # restore default action $SIG{'QUIT'} = 'IGNORE'; # ignore SIGQUIT The SIG array only contains values for the signals actually set within the perl script. Packages Perl provides a mechanism for alternate namespaces to pro- tect packages from stomping on each others variables. By default, a perl script starts compiling into the package known as "main". By use of the package declaration, you can switch namespaces. The scope of the package declara- tion is from the declaration itself to the end of the enclosing block (the same scope as the local() operator). Typically it would be the first declaration in a file to be included by the "require" operator. You can switch into a package in more than one place; it merely influ- ences which symbol table is used by the compiler for the rest of that block. You can refer to variables and file- handles in other packages by prefixing the identifier with the package name and a single quote. If the package name is null, the "main" package as assumed. Only identifiers starting with letters are stored in the packages symbol table. All other symbols are kept in package "main". In addition, the identifiers STDIN, STD- OUT, STDERR, ARGV, ARGVOUT, ENV, INC and SIG are forced to be in package "main", even when used for other purposes than their built-in one. Note also that, if you have a package called "m", "s" or "y", the you can't use the qualified form of an identifier since it will be inter- preted instead as a pattern match, a substitution or a translation. Release 4.0 Patchlevel 19 93 PERL(1) PERL(1) Eval'ed strings are compiled in the package in which the eval was compiled in. (Assignments to $SIG{}, however, assume the signal handler specified is in the main pack- age. Qualify the signal handler name if you wish to have a signal handler in a package.) For an example, examine perldb.pl in the perl library. It initially switches to the DB package so that the debugger doesn't interfere with variables in the script you are trying to debug. At vari- ous points, however, it temporarily switches back to the main package to evaluate various expressions in the con- text of the main package. The symbol table for a package happens to be stored in the associative array of that name prepended with an under- score. The value in each entry of the associative array is what you are referring to when you use the *name nota- tion. In fact, the following have the same effect (in package main, anyway), though the first is more efficient because it does the symbol table lookups at compile time: local(*foo) = *bar; local($_main{'foo'}) = $_main{'bar'}; You can use this to print out all the variables in a pack- age, for instance. Here is dumpvar.pl from the perl library: package dumpvar; sub main'dumpvar { ($package) = @_; local(*stab) = eval("*_$package"); while (($key,$val) = each(%stab)) { { local(*entry) = $val; if (defined $entry) { print "\$$key = '$entry'\n"; } if (defined @entry) { print "\@$key = (\n"; foreach $num ($[ .. $#entry) { print " $num\t'",$entry[$num],"'\n"; } print ")\n"; } if ($key ne "_$package" && defined %entry) { print "\%$key = (\n"; foreach $key (sort keys(%entry)) { print " $key\t'",$entry{$key},"'\n"; } print ")\n"; } } } } Release 4.0 Patchlevel 19 94 PERL(1) PERL(1) Note that, even though the subroutine is compiled in pack- age dumpvar, the name of the subroutine is qualified so that its name is inserted into package "main". Style Each programmer will, of course, have his or her own pref- erences in regards to formatting, but there are some gen- eral guidelines that will make your programs easier to read. 1. Just because you CAN do something a particular way doesn't mean that you SHOULD do it that way. Perl is designed to give you several ways to do anything, so consider picking the most readable one. For instance open(FOO,$foo) || die "Can't open $foo: $!"; is better than die "Can't open $foo: $!" unless open(FOO,$foo); because the second way hides the main point of the statement in a modifier. On the other hand print "Starting analysis\n" if $verbose; is better than $verbose && print "Starting analysis\n"; since the main point isn't whether the user typed -v or not. Similarly, just because an operator lets you assume default arguments doesn't mean that you have to make use of the defaults. The defaults are there for lazy systems programmers writing one-shot programs. If you want your program to be readable, consider supplying the argument. Along the same lines, just because you can omit paren- theses in many places doesn't mean that you ought to: return print reverse sort num values array; return print(reverse(sort num (values(%array)))); When in doubt, parenthesize. At the very least it will let some poor schmuck bounce on the % key in vi. Even if you aren't in doubt, consider the mental wel- fare of the person who has to maintain the code after you, and who will probably put parens in the wrong place. Release 4.0 Patchlevel 19 95 PERL(1) PERL(1) 2. Don't go through silly contortions to exit a loop at the top or the bottom, when perl provides the "last" operator so you can exit in the middle. Just outdent it a little to make it more visible: line: for (;;) { statements; last line if $foo; next line if /^#/; statements; } 3. Don't be afraid to use loop labels--they're there to enhance readability as well as to allow multi-level loop breaks. See last example. 4. For portability, when using features that may not be implemented on every machine, test the construct in an eval to see if it fails. If you know what version or patchlevel a particular feature was implemented, you can test $] to see if it will be there. 5. Choose mnemonic identifiers. 6. Be consistent. Debugging If you invoke perl with a -d switch, your script will be run under a debugging monitor. It will halt before the first executable statement and ask you for a command, such as: h Prints out a help message. T Stack trace. s Single step. Executes until it reaches the beginning of another statement. n Next. Executes over subroutine calls, until it reaches the beginning of the next state- ment. f Finish. Executes statements until it has fin- ished the current subroutine. c Continue. Executes until the next breakpoint is reached. Release 4.0 Patchlevel 19 96 PERL(1) PERL(1) c line Continue to the specified line. Inserts a one-time-only breakpoint at the specified line. Repeat last n or s. l min+incr List incr+1 lines starting at min. If min is omitted, starts where last listing left off. If incr is omitted, previous value of incr is used. l min-max List lines in the indicated range. l line List just the indicated line. l List next window. - List previous window. w line List window around line. l subname List subroutine. If it's a long subroutine it just lists the beginning. Use "l" to list more. /pattern/ Regular expression search forward for pattern; the final / is optional. ?pattern? Regular expression search backward for pat- tern; the final ? is optional. L List lines that have breakpoints or actions. S Lists the names of all subroutines. t Toggle trace mode on or off. b line condition Set a breakpoint. If line is omitted, sets a breakpoint on the line that is about to be executed. If a condition is specified, it is evaluated each time the statement is reached and a breakpoint is taken only if the condi- tion is true. Breakpoints may only be set on lines that begin an executable statement. b subname condition Set breakpoint at first executable line of subroutine. d line Delete breakpoint. If line is omitted, deletes the breakpoint on the line that is about to be executed. Release 4.0 Patchlevel 19 97 PERL(1) PERL(1) D Delete all breakpoints. a line command Set an action for line. A multi-line command may be entered by backslashing the newlines. A Delete all line actions. < command Set an action to happen before every debugger prompt. A multi-line command may be entered by backslashing the newlines. > command Set an action to happen after the prompt when you've just given a command to return to exe- cuting the script. A multi-line command may be entered by backslashing the newlines. V package List all variables in package. Default is main package. ! number Redo a debugging command. If number is omit- ted, redoes the previous command. ! -number Redo the command that was that many commands ago. H -number Display last n commands. Only commands longer than one character are listed. If number is omitted, lists them all. q or ^D Quit. command Execute command as a perl statement. A miss- ing semicolon will be supplied. p expr Same as "print DB'OUT expr". The DB'OUT file- handle is opened to /dev/tty, regardless of where STDOUT may be redirected to. If you want to modify the debugger, copy perldb.pl from the perl library to your current directory and modify it as necessary. (You'll also have to put -I. on your com- mand line.) You can do some customization by setting up a .perldb file which contains initialization code. For instance, you could make aliases like these: $DB'alias{'len'} = 's/^len(.*)/p length($1)/'; $DB'alias{'stop'} = 's/^stop (at|in)/b/'; $DB'alias{'.'} = 's/^\./p "\$DB\'sub(\$DB\'line):\t",\$DB\'line[\$DB\'line]/'; Release 4.0 Patchlevel 19 98 PERL(1) PERL(1) Setuid Scripts Perl is designed to make it easy to write secure setuid and setgid scripts. Unlike shells, which are based on multiple substitution passes on each line of the script, perl uses a more conventional evaluation scheme with fewer hidden "gotchas". Additionally, since the language has more built-in functionality, it has to rely less upon external (and possibly untrustworthy) programs to accom- plish its purposes. In an unpatched 4.2 or 4.3bsd kernel, setuid scripts are intrinsically insecure, but this kernel feature can be disabled. If it is, perl can emulate the setuid and set- gid mechanism when it notices the otherwise useless setuid/gid bits on perl scripts. If the kernel feature isn't disabled, perl will complain loudly that your setuid script is insecure. You'll need to either disable the kernel setuid script feature, or put a C wrapper around the script. When perl is executing a setuid script, it takes special precautions to prevent you from falling into any obvious traps. (In some ways, a perl script is more secure than the corresponding C program.) Any command line argument, environment variable, or input is marked as "tainted", and may not be used, directly or indirectly, in any command that invokes a subshell, or in any command that modifies files, directories or processes. Any variable that is set within an expression that has previously referenced a tainted value also becomes tainted (even if it is logi- cally impossible for the tainted value to influence the variable). For example: $foo = shift; # $foo is tainted $bar = $foo,'bar'; # $bar is also tainted $xxx = <>; # Tainted $path = $ENV{'PATH'}; # Tainted, but see below $abc = 'abc'; # Not tainted system "echo $foo"; # Insecure system "/bin/echo", $foo; # Secure (doesn't use sh) system "echo $bar"; # Insecure system "echo $abc"; # Insecure until PATH set $ENV{'PATH'} = '/bin:/usr/bin'; $ENV{'IFS'} = '' if $ENV{'IFS'} ne ''; $path = $ENV{'PATH'}; # Not tainted system "echo $abc"; # Is secure now! Release 4.0 Patchlevel 19 99 PERL(1) PERL(1) open(FOO,"$foo"); # OK open(FOO,">$foo"); # Not OK open(FOO,"echo $foo|"); # Not OK, but... open(FOO,"-|") || exec 'echo', $foo; # OK $zzz = `echo $foo`; # Insecure, zzz tainted unlink $abc,$foo; # Insecure umask $foo; # Insecure exec "echo $foo"; # Insecure exec "echo", $foo; # Secure (doesn't use sh) exec "sh", '-c', $foo; # Considered secure, alas The taintedness is associated with each scalar value, so some elements of an array can be tainted, and others not. If you try to do something insecure, you will get a fatal error saying something like "Insecure dependency" or "Insecure PATH". Note that you can still write an inse- cure system call or exec, but only by explicitly doing something like the last example above. You can also bypass the tainting mechanism by referencing subpat- terns--perl presumes that if you reference a substring using $1, $2, etc, you knew what you were doing when you wrote the pattern: $ARGV[0] =~ /^-P(\w+)$/; $printer = $1; # Not tainted This is fairly secure since \w+ doesn't match shell metacharacters. Use of .+ would have been insecure, but perl doesn't check for that, so you must be careful with your patterns. This is the ONLY mechanism for untainting user supplied filenames if you want to do file operations on them (unless you make $> equal to $<). It's also possible to get into trouble with other opera- tions that don't care whether they use tainted values. Make judicious use of the file tests in dealing with any user-supplied filenames. When possible, do opens and such after setting $> = $<. Perl doesn't prevent you from opening tainted filenames for reading, so be careful what you print out. The tainting mechanism is intended to pre- vent stupid mistakes, not to remove the need for thought. ENVIRONMENT Perl uses PATH in executing subprocesses, and in finding the script if -S is used. HOME or LOGDIR are used if chdir has no argument. Apart from these, perl uses no environment variables, except to make them available to the script being Release 4.0 Patchlevel 19 100 PERL(1) PERL(1) executed, and to child processes. However, scripts run- ning setuid would do well to execute the following lines before doing anything else, just to keep people honest: $ENV{'PATH'} = '/bin:/usr/bin'; # or whatever you need $ENV{'SHELL'} = '/bin/sh' if $ENV{'SHELL'} ne ''; $ENV{'IFS'} = '' if $ENV{'IFS'} ne ''; AUTHOR Larry Wall MS-DOS port by Diomidis Spinellis FILES /tmp/perl-eXXXXXX temporary file for -e commands. SEE ALSO a2p awk to perl translator s2p sed to perl translator DIAGNOSTICS Compilation errors will tell you the line number of the error, with an indication of the next token or token type that was to be examined. (In the case of a script passed to perl via -e switches, each -e is counted as one line.) Setuid scripts have additional constraints that can pro- duce error messages such as "Insecure dependency". See the section on setuid scripts. TRAPS Accustomed awk users should take special note of the fol- lowing: * Semicolons are required after all simple statements in perl. Newline is not a statement delimiter. * Curly brackets are required on ifs and whiles. * Variables begin with $ or @ in perl. * Arrays index from 0 unless you set $[. Likewise string positions in substr() and index(). * You have to decide whether your array has numeric or string indices. * Associative array values do not spring into existence upon mere reference. * You have to decide whether you want to use string or numeric comparisons. * Reading an input line does not split it for you. You Release 4.0 Patchlevel 19 101 PERL(1) PERL(1) get to split it yourself to an array. And the split operator has different arguments. * The current input line is normally in $_, not $0. It generally does not have the newline stripped. ($0 is the name of the program executed.) * $ does not refer to fields--it refers to sub- strings matched by the last match pattern. * The print statement does not add field and record sep- arators unless you set $, and $\. * You must open your files before you print to them. * The range operator is "..", not comma. (The comma operator works as in C.) * The match operator is "=~", not "~". ("~" is the one's complement operator, as in C.) * The exponentiation operator is "**", not "^". ("^" is the XOR operator, as in C.) * The concatenation operator is ".", not the null string. (Using the null string would render "/pat/ /pat/" unparsable, since the third slash would be interpreted as a division operator--the tokener is in fact slightly context sensitive for operators like /, ?, and <. And in fact, . itself can be the beginning of a number.) * Next, exit and continue work differently. * The following variables work differently Awk Perl ARGC $#ARGV ARGV[0] $0 FILENAME $ARGV FNR $. - something FS (whatever you like) NF $#Fld, or some such NR $. OFMT $# OFS $, ORS $\ RLENGTH length($&) RS $/ RSTART length($`) SUBSEP $; * When in doubt, run the awk construct through a2p and Release 4.0 Patchlevel 19 102 PERL(1) PERL(1) see what it gives you. Cerebral C programmers should take note of the following: * Curly brackets are required on ifs and whiles. * You should use "elsif" rather than "else if" * Break and continue become last and next, respectively. * There's no switch statement. * Variables begin with $ or @ in perl. * Printf does not implement *. * Comments begin with #, not /*. * You can't take the address of anything. * ARGV must be capitalized. * The "system" calls link, unlink, rename, etc. return nonzero for success, not 0. * Signal handlers deal with signal names, not numbers. Seasoned sed programmers should take note of the follow- ing: * Backreferences in substitutions use $ rather than \. * The pattern matching metacharacters (, ), and | do not have backslashes in front. * The range operator is .. rather than comma. Sharp shell programmers should take note of the following: * The backtick operator does variable interpretation without regard to the presence of single quotes in the command. * The backtick operator does no translation of the return value, unlike csh. * Shells (especially csh) do several levels of substitu- tion on each command line. Perl does substitution only in certain constructs such as double quotes, backticks, angle brackets and search patterns. * Shells interpret scripts a little bit at a time. Perl compiles the whole program before executing it. Release 4.0 Patchlevel 19 103 PERL(1) PERL(1) * The arguments are available via @ARGV, not $1, $2, etc. * The environment is not automatically made available as variables. ERRATA AND ADDENDA The Perl book, Programming Perl , has the following omis- sions and goofs. On page 5, the examples which read eval "/usr/bin/perl should read eval "exec /usr/bin/perl On page 195, the equivalent to the System V sum program only works for very small files. To do larger files, use undef $/; $checksum = unpack("%32C*",<>) % 32767; The descriptions of alarm and sleep refer to signal SIGALARM. These should refer to SIGALRM. The -0 switch to set the initial value of $/ was added to Perl after the book went to press. The -l switch now does automatic line ending processing. The qx// construct is now a synonym for backticks. $0 may now be assigned to set the argument displayed by ps (1). The new @###.## format was omitted accidentally from the description on formats. It wasn't known at press time that s///ee caused multiple evaluations of the replacement expression. This is to be construed as a feature. (LIST) x $count now does array replication. There is now no limit on the number of parentheses in a regular expression. In double-quote context, more escapes are supported: \e, \a, \x1b, \c[, \l, \L, \u, \U, \E. The latter five con- trol up/lower case translation. Release 4.0 Patchlevel 19 104 PERL(1) PERL(1) The $/ variable may now be set to a multi-character delim- iter. There is now a g modifier on ordinary pattern matching that causes it to iterate through a string finding multi- ple matches. All of the $^X variables are new except for $^T. The default top-of-form format for FILEHANDLE is now FILE- HANDLE_TOP rather than top. The eval {} and sort {} constructs were added in version 4.018. The v and V (little-endian) template options for pack and unpack were added in 4.019. BUGS Perl is at the mercy of your machine's definitions of var- ious operations such as type casting, atof() and sprintf(). If your stdio requires an seek or eof between reads and writes on a particular stream, so does perl. (This doesn't apply to sysread() and syswrite().) While none of the built-in data types have any arbitrary size limits (apart from memory size), there are still a few arbitrary limits: a given identifier may not be longer than 255 characters, and no component of your PATH may be longer than 255 if you use -S. Perl actually stands for Pathologically Eclectic Rubbish Lister, but don't tell anyone I said that. Release 4.0 Patchlevel 19 105